Heater Matrix and front shocks for Elise S1
Discussion
The heater matrix is the same as the one fitted to the older London Taxis I believe (FX4 or something) have fun fitting it, I did it on mine (also a 2000 car) and found that Lotus had changed the heater box that the matrix is mounted in to a cheaper design to the one on earlier cars, you have to drill out a few rivets to get the old matrix out, then carefully rivet the new assembly together, be careful not to puncture the new matrix as the rivets pass very close!
Its also a good idea to get yourself some draft excluder foam to re-seal the box before you put it back together, just make sure you get the stuff without a glue backing as it'll stink every time the heater warms it up!
Its an akward pig of a job!
Jez
Its also a good idea to get yourself some draft excluder foam to re-seal the box before you put it back together, just make sure you get the stuff without a glue backing as it'll stink every time the heater warms it up!
Its an akward pig of a job!
Jez
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


