Afterburner Wiring

[l6nex]

Afternoon Guys,

Does anyone have a bit of knowledge of what wires from the existing rear lighting loom went where on the Marcos Afterburner lights, having a little trouble wiring them up.

Regards

David

[F.C.]

Naaa! you don't want to be hassled with those lights, Just send them to me and I'll send you back a brand new set of Mondeo ones that'll fit straight on

Sorry no idea on fitting as I haven't actually seen them from the inside.
Where did you get them out of interest?
I've been trying to buy a set since last Christmas!
F.C.

[l6nex]

Managed to get the wiring details from the manual, got the lights from Gary at Crazy Horses, he's been trying to get more but marcos went into recievership Im told.

[T&T]

You must have had these some time ( or have a "special relationship" as I asked CH if they has some a couple of months ago and was told the same regarding Marcos.

Anyway , you're a lucky chap , make sure you stick them on good and tight !!!

[Twerlie]

You have to be brave when fitting them!

1. Mask up


2. Air saw at the ready!


3. Cut just enough away!


4. Hold in place while sealing and fibreglassing


5. Inside view


6. After wiring up, seal and cover!


7. Finished...!

[worty]

Is that guy on the left physically disabled or walking up a hill /
worty

[F.C.]

worty said:

Is that guy on the left physically disabled or walking up a hill /
worty

No! he's carrying an invisible suitcase full of bricks
F.C.

[l6nex]

Hi,

Yep had the lights a while, just been waiting till the car was off the road over the winter to do all the little things, got them fitting ok after terrifing myself cutting the car!! got all the lights working apart from the ring of LEDS having a little trouble there, anyone any ideas??

Dave

[johnzy]

Hi i fitted a set to mine a while ago!, reverse the wiring going to the led's it will be ok then ,led's only work when the + and - are the right way not like a normal bulb ,best of luck