What are the standard rear discs off ?

[steve-V8s]

One of the winter jobs is to replace the rear discs, they look OK on the outside but are badly corroded on the inside surfaces. Looks to be a simple job but what are they off, is it a ford Granada ? Could go to one of the TVR parts people but I did that with the Callipers and found I had paid rather a lot for a ford part. Car is a 98 500

[Bluebottle]

These two links should answer your question;

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

[Pasco]

Just out of interest what are your rear disks off /from Fordy ? as i see yours are grooved

[spend]

Grooves = (w/e) few quid @ engineers if you want them done.

Dave

[clive f]

Pasco said:

Just out of interest what are your rear disks off /from Fordy ? as i see yours are grooved

got mine from "need for speed" website, Black diamond, cant remember how much as I bought the set, but cheaper than a lot of other places.

[pikey]

I think it's a Granada. Was a very standard Ford part.

Take yours off, go into Halfords and try to match.

Did that with my Chimaera's disks. Only took a few minutes of searching

[Bluebottle]

Pasco said:

Just out of interest what are your rear disks off /from Fordy ? as i see yours are grooved

Hi Paul the Black Diamond grooved disc refs. are on the GriffPages mate

[grumpy bear]

Try here for the info

http://www.ebcbrakesdirect.com/

It does list TVR's once I had the part numbers I did a search on the site and that then tells you what they were fitted to.


I just had mine done 98 500 for £135 (some discount included) included pads. Couldnt see where you are from your profile but if you are anywhere near Stevenage in Herts I can fully reccomend AJS.

Edited by grumpy bear on Friday 7th December 15:20

[Pasco]

Bluebottle said:

Pasco said:

Just out of interest what are your rear disks off /from Fordy ? as i see yours are grooved

Hi Paul the Black Diamond grooved disc refs. are on the GriffPages mate

Thanks Hamish and you Ugly

[Pasco]

spend said:

Grooves = (w/e) few quid @ engineers if you want them done.

Dave

Grooves = Well Endowed I worry about you Spendy have you been talking to Fordy's lad Tarquin ?

[clive f]

If your worried about Spendy, Paul, you ought to check out his pics on his website via his profile, I was shocked at first, but then remembered he is a chim owner

Edited by clive f on Friday 7th December 19:46

[Pasco]

clive f said:

If your worried about Spendy, Paul, you ought to check out his pics on his website via his profile, I was shocked at first, but then remembered he is a chim owner

Edited by clive f on Friday 7th December 19:46

See what you mean

[spend]

w/e stands for weekend to most be people! I pity you, it must be heart breaking constantly searching for topics on how to enlarge your miniscule endowment only to be deflated

Dave

[clive f]

spend said:

w/e stands for weekend to most be people! I pity you, it must be heart breaking constantly searching for topics on how to enlarge your miniscule endowment only to be deflated

Dave

Dave, my cousins, next door neighbours best mate works in the packaging department of a firm selling penis pumps, and apparently there is a David Spenceley in Derbyshire who is one of their best customers.

[honeybear]

Been observing these forums for a while and no wonder they are falling apart. A member asks for advice, and the usual suspects hijack the thread for thier own conversation.

b##g#r off and use email if you want to transmit drivel

[Pasco]

honeybear said:

Been observing these forums for a while and no wonder they are falling apart. A member asks for advice, and the usual suspects hijack the thread for thier own conversation.

b##g#r off and use email if you want to transmit drivel

So are you changing your name to Troll

When you have knocked up a decent post count then stick your nose in

My advise to you Pall is Off and Mind your own Business !!

[honeybear]

Thsts no way to talk to a lady. you've proved my point admirably though.

Pasco said:

honeybear said:

Been observing these forums for a while and no wonder they are falling apart. A member asks for advice, and the usual suspects hijack the thread for thier own conversation.

b##g#r off and use email if you want to transmit drivel

So are you changing your name to Troll

When you have knocked up a decent post count then stick your nose in

My advise to you Pall is Off and Mind your own Business !!

[clive f]

perhaps once you have been on here a while and made a few worthwhile contributions yourself you will have earnt the right to poke your nose in, helping people out by giving advice from ones own experiences is the main aim of these forums, but if there was no sense of humour then you`d find a handfull of anoraks on the site and that would be it!

think before you

[Pasco]

honeybear said:

Thsts no way to talk to a lady. you've proved my point admirably though.

Pasco said:

honeybear said:

Been observing these forums for a while and no wonder they are falling apart. A member asks for advice, and the usual suspects hijack the thread for thier own conversation.

b##g#r off and use email if you want to transmit drivel

So are you changing your name to Troll

When you have knocked up a decent post count then stick your nose in

My advise to you Pall is Off and Mind your own Business !!

Bull shite your a regular on hear using a different computer IMHO so Sod Off

[Ballistic Banana]

From my Blog Clicky

---

New discs and pads all round due to juddering, found to be broken pad and caliper seal gone.




exchange caliper £31 from local company.

All EBC
Front
GD150 Front Disc's £98.72 Sierra
Red Stuff pads DP3605/2C £38.50 RS turbo


Rear
GD558 Rear Disc's £91.82 Cossie 4x4
Red Stuff pads DP3617c £36.17 Sierra Cossie

Total £320.62

From www.performance-tuning.co.uk
[e-mail]





Done a bit of hammeriteing while all the wheels where off and repainted the calipers. All looks pretty good and covered underneath.

---

Theres mre info on parts on the Alternative parts list on TGP


HTH

BB