break upgrade
break upgrade
Author
Discussion

adyw

Original Poster:

388 posts

273 months

Monday 17th December 2007
quotequote all
Has anyone fitted these,
they are cheap, but that's not always best.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...

Pasco

6,652 posts

258 months

Monday 17th December 2007
quotequote all
I seem to recall someone having problems with cross drilled disks on a Griff, in fact i think they cracked scratchchin through the holes to the O/D of the disk

Fat Griff

176 posts

266 months

Monday 17th December 2007
quotequote all
Disc's that have been drilled by an after market engineer are know to crack as i was told. I just went for a grooved option and had no problems what so ever!

900T-R

20,406 posts

287 months

Monday 17th December 2007
quotequote all
Personally I´d go with a decent pad on a plain disc (Ferodo DS compounds are non gassing anyway) rather than bling, grooved/drilled/cadmium coated/whatever discs. Learned this the hard way - my nice and expensive Tar.Ox grooved discs didn´t really retard the Saab much better with the OE pads. Ferodo DS3000s on plain Brembos though... (ok ok I upgraded to a bigger vented disc and bigger callipers of a later 9000 model at the same time...).

SLOWER

235 posts

227 months

Monday 17th December 2007
quotequote all
900T-R said:
Personally I´d go with a decent pad on a plain disc (Ferodo DS compounds are non gassing anyway) rather than bling, grooved/drilled/cadmium coated/whatever discs. Learned this the hard way - my nice and expensive Tar.Ox grooved discs didn´t really retard the Saab much better with the OE pads. Ferodo DS3000s on plain Brembos though... (ok ok I upgraded to a bigger vented disc and bigger callipers of a later 9000 model at the same time...).
yes

Mintex1144 brake pads are best you can get for Chim/Griff for stopping power, though they do squeak.

clive f

7,259 posts

263 months

Monday 17th December 2007
quotequote all
SLOWER said:
900T-R said:
Personally I´d go with a decent pad on a plain disc (Ferodo DS compounds are non gassing anyway) rather than bling, grooved/drilled/cadmium coated/whatever discs. Learned this the hard way - my nice and expensive Tar.Ox grooved discs didn´t really retard the Saab much better with the OE pads. Ferodo DS3000s on plain Brembos though... (ok ok I upgraded to a bigger vented disc and bigger callipers of a later 9000 model at the same time...).
yes

Mintex1144 brake pads are best you can get for Chim/Griff for stopping power, though they do squeak.
what he saidyes

adyw

Original Poster:

388 posts

273 months

Monday 17th December 2007
quotequote all
thanks gents