Speed pulse/signal wire
Discussion
Actually this may be the diagram you need.
http://tvr1.members.winisp.net/cerbwiring/CEPD003C...
It shows the speed pick-up wire on it.
http://tvr1.members.winisp.net/cerbwiring/CEPD003C...
It shows the speed pick-up wire on it.
The speedo sensor is fastened to the rear axle and gets its pulses from the abs ring fastened to the drive shaft flange.
I've never traced the wire but I would have thought it comes off the diff, up into the car and into the loom under the helmet holder and forward under the centre console.
On the wiring diagrams the colours are S(?) changing to Y (yellow?) at the speedo end. Hope this helps.
I've never traced the wire but I would have thought it comes off the diff, up into the car and into the loom under the helmet holder and forward under the centre console.
On the wiring diagrams the colours are S(?) changing to Y (yellow?) at the speedo end. Hope this helps.

Gassing Station | Cerbera | Top of Page | What's New | My Stuff


