Amp in Cerbera
Author
Discussion

rjben

Original Poster:

917 posts

310 months

Thursday 17th July 2003
quotequote all
Hi,

I want to sort out the stereo in my Cerbera and hopped that somebody could give me a little advice. The car is a 2000LW, not sure if there is a difference between models for running cables etc.

Basically there are two things I need to know.

1) How do I run a power cable from battery to boot, really I'm just concerned about getting the cable through the bulkhead. Are there any grommets I could use?

2) Where would the best place for the amp be? I'm just thinking about the amount of effort to re-route all the speaker cable etc and want to keep this to a minimum.

Any help would be much appreciated.

Cheers,

Rob

rjben

Original Poster:

917 posts

310 months

Friday 18th July 2003
quotequote all
I can't believe that none of you lot have ever done this......... ;->

simonsparrow

1,598 posts

290 months

Friday 18th July 2003
quotequote all
www.pistonheads.com/gassing/topic.asp?t=31180&f=6&h=0&hw=amp+ICE
www.pistonheads.com/gassing/topic.asp?t=22147&f=6&h=0&hw=amp+ICE

Found these by searching the Cerbera forum using 'amp ice' as keywords. Mine used to have an amp in the boot (fitted by the previous owner) so I'm guessing the power supply was taken from the fuse box in the boot.

Funny, I don't listen to the stereo at all......