wiper motor advice
wiper motor advice
Author
Discussion

airborne midget

Original Poster:

126 posts

242 months

Sunday 3rd February 2008
quotequote all
Need some advice on wiper motor, have changed wiper switch which was corroded, put all back together and when I press the wiper button on steering wheel hear DULL clicking from passenger footwell any advice, as to fix

jbvipercerb

246 posts

250 months

Sunday 3rd February 2008
quotequote all
Have you checked if the linkege is still attached? maybe it droped off and the noise is the motor going round and hitting the free end of the cable?idea

Brummmie

5,284 posts

251 months

Sunday 3rd February 2008
quotequote all
Whem mine developed a fault it was simply a bad connection on the ribbon tape from the steering wheel to contorol box, my control box is located above the steering column. If your control box is recieving a signal on the low voltage side, then check the high voltage side eg wiper motor.

optimax sniffer

1,817 posts

245 months

Sunday 3rd February 2008
quotequote all
Can you supply 12v to the motor to check that the motor still works...

airborne midget

Original Poster:

126 posts

242 months

Monday 4th February 2008
quotequote all
Ian, (optimax)
What would be best way to try and get 12V to the wiper motor any advice

Cheers

RUSSELLM

6,002 posts

277 months

Monday 4th February 2008
quotequote all
12v+ from red terminal of the battery & 0v- from the oil cap smile