EXIGE WHEELS ON AN ELISE

[GSXRJIM]

I am going to be buying an S2 Elise in the next month or two and have recently seen one with the black Exige S2 multispoke wheels on it and thought it looked awesome. Do you know if it is a straight forwards swap and where you can get them from. Thanx Jim

[chrisstringer]

My Sports Racer's fitted with the same lightweight 7 spoke jobs as Purdy84's Exige. Assume they can therefore be fitted to any S2 Elise (and that also enables the fitment of 48's )

HTH, Chris

[Gooby]

I believe the wheels are different on yota engined cars as to the k series cars.

[Scuffers]

Gooby said:

I believe the wheels are different on yota engined cars as to the k series cars.

you are correct, the offsets at the rear are different

[Cuzza]

You can get multispokes for the K series cars too like this



They are OZs and I think Hangar111 used to do them, among others

[Stonie]

It depends on which S2. A straight fitment to a Toyota S2, aka 111R etc. is not a problem. But to a K Series S2, you'll need wheel adapters because the bolt PCD is different, between the two cars. Try looking on eBay or PH classifieds from time to time... they do appear, other than those, a dealer.

[Scuffers]

Stonie said:

It depends on which S2. A straight fitment to a Toyota S2, aka 111R etc. is not a problem. But to a K Series S2, you'll need wheel adapters because the bolt PCD is different, between the two cars. Try looking on eBay or PH classifieds from time to time... they do appear, other than those, a dealer.

wrong..

PCD is the same, it's the offset of the rears that's different...

[GSXRJIM]

All very much appreciated, cheers

[VTECMatt]

I have them fitted you can get the spacers from Geary, fronts fit fine just need the spacers for the Rear.

Edited by VTECMatt on Friday 8th February 21:33