Missfire in a 25 1.4

Missfire in a 25 1.4

Author
Discussion

gj88

Original Poster:

1,960 posts

196 months

Wednesday 20th February 2008
quotequote all
hey guys. Im in need of sum help. My rover 25 1.4 has a missfire. Dont know whats causing it. Ive changed the leads and spark plugs for new sets, its had a full service amongst other things and this cured the problem for about a week. Now the missfire is back and as bad as it was before. Im a little lost now. i dont know all that much about the mechanicals so anyone have any ideas? The car has an induction kit which has been on since the start of summer or there abouts but otherwise is completely standard. Im getting pretty fed up with it now as its getting to the point where i cant apply any pressure to the accelerator because the missfire gets worse. Anyone else had this problem in the cold temperatures? doesnt happen when the car is warm so much. I would have thought that new leads would have stopped any arching so i dont know wot else it could be. Cheers for any help and advice.

Hut49

3,544 posts

264 months

Wednesday 20th February 2008
quotequote all
Have you tried running the engine in the dark and looking for any signs of shorting?

My initial reaction was to think coil, distributor cap or rotor arm, probably in that order.

You might find other ideas here: http://forums.mg-rover.org/forumdisplay.php?f=101

Edited by Hut49 on Wednesday 20th February 17:18

gj88

Original Poster:

1,960 posts

196 months

Wednesday 20th February 2008
quotequote all
I'll give it ago. Thanks for the help hut49!

gj88

Original Poster:

1,960 posts

196 months

Wednesday 20th February 2008
quotequote all
ok, no shorting...

Platinum

2,101 posts

225 months

Friday 22nd February 2008
quotequote all
Does it struggle up hills in higher gears, and the misfire gets worse?

In ours it was the coil that had packed up.

gj88

Original Poster:

1,960 posts

196 months

Saturday 23rd February 2008
quotequote all
It doesnt generally get any worse up hills tbh but its now getting to the stage where it doesnt want to drive. I'll change the coils and see what happens. Cheers for the input Platinum

Platinum

2,101 posts

225 months

Saturday 23rd February 2008
quotequote all
Your probably best trying over here for further information.

This will keep you occupied for a few hours:

http://forums.mg-rover.org/search.php?searchid=239...

jimtyjimjim

14 posts

193 months

Monday 26th May 2008
quotequote all
hows the water level look?? do it inter rev when you 1st start it (go up down)(inlet manafold air leak} have you changed the coil?? have you put a injector cleaner in your fule?? is it only doing this when your car is hot?