Old Question Probably, but what Oil........
Discussion
Hi All. Haven't had the Griff very long, and decided to check the oil. Bit low so want to top it up.
I don't have a manual for it (if anyone has a relevant manual they wish to part with let me know) so the question is, what is the recommended (from both TVR and knowledgable owners) / best oil to use ?
I don't have a manual for it (if anyone has a relevant manual they wish to part with let me know) so the question is, what is the recommended (from both TVR and knowledgable owners) / best oil to use ?
Don't know where you are in the North East Jim but I got my Millers from here http://www.asperformance.com/oils.htm
Opie oils are very good value.
They should be at he Growl again and wil do discounts for collection. Best to get your 12 month supply then.
Personally use the Silkolene - uses very little and has anti shear (something to do with reducing the breakdown of the oil at high temps), too technical for me but it was recommended by Guy at Opie.
http://www.opieoils.co.uk/default.aspx
FFG
They should be at he Growl again and wil do discounts for collection. Best to get your 12 month supply then.
Personally use the Silkolene - uses very little and has anti shear (something to do with reducing the breakdown of the oil at high temps), too technical for me but it was recommended by Guy at Opie.
http://www.opieoils.co.uk/default.aspx
FFG
Simpo Two said:
rev-erend said:
You can mix all oils
So what exactly DOES happen when you mix mineral with synthetic, or is it all a con?All oils are a mixture..
What ever oil you buy is a mixture.
Base oil, plus the addatives - the expensive oils have expensive addatives.
Gassing Station | Griffith | Top of Page | What's New | My Stuff




HTH
