TAMORA ROOF SECTION INTO BOOT !
TAMORA ROOF SECTION INTO BOOT !
Author
Discussion

PYNEY

Original Poster:

1,048 posts

247 months

Thursday 28th February 2008
quotequote all
hi,is there away that you can get the roof panel in and out of the boot without getting it wedged , stuck etc
sometimes it may fall in ! but each time is different, has anyone got any tips ? or best way to put it in,
took it out of the boot tonight but it got wedged and some of the rubber trims came off which is a real pain,
there must be an easy way to do this lol

willyworm

433 posts

268 months

Friday 29th February 2008
quotequote all
Lengthen the ram which is attached to the boot and the car,
remove from the car, unscrew each end, add a couple of wahers and screw ends back in.
This will lengthen the ram allowing the boot to open a bit more so making it easier to get top in.
Hope this makes sense.
John

beer

LaserTam

2,183 posts

248 months

Friday 29th February 2008
quotequote all
What he said, works a treat. Just increases the angle of the boot lid enough to not make it a squeeze. You still get the rubbers coming off occaisionally, and getting a roof bag does help with that, and protects the roof when you have luggage in the boot.

Have read on here about screwing the rubber strips into the rood panel, but I have not felt the need yet.

PYNEY

Original Poster:

1,048 posts

247 months

Friday 29th February 2008
quotequote all
thanks boys i'll give that a try ,the boot did cause the problem ,and making it go at a higher angle should be alot easier to get it in and out thankyou keith

p.s. where can you buy a roof panel protection bag from !

bartesque

571 posts

232 months

Friday 29th February 2008
quotequote all
PYNEY said:
thanks boys i'll give that a try ,the boot did cause the problem ,and making it go at a higher angle should be alot easier to get it in and out thankyou keith

p.s. where can you buy a roof panel protection bag from !
Wife brought me mine from Leven

It's the same one as the Griff / Chim but works perfectly

http://www.leventechnology.co.uk/index.htm

Edited by bartesque on Friday 29th February 16:26

LaserTam

2,183 posts

248 months

Friday 29th February 2008
quotequote all
Yep, Leven for me too. Fortunately, I only live down the road to them, and not on an island in the channel, like Bart....smile But yes the Chim/Griff cover does the job. I have had to add some duck tape to the bag, because it still rubs in places.

NCC

425 posts

313 months

Saturday 1st March 2008
quotequote all
PYNEY said:
p.s. where can you buy a roof panel protection bag from !
Yup, Leven do them. Alternatively, a couple of black bin liners do a pretty good job too wink

PYNEY

Original Poster:

1,048 posts

247 months

Saturday 1st March 2008
quotequote all
thanks guys

bartesque

571 posts

232 months

Sunday 2nd March 2008
quotequote all
LaserTam said:
Yep, Leven for me too. Fortunately, I only live down the road to them, and not on an island in the channel, like Bart....smile But yes the Chim/Griff cover does the job. I have had to add some duck tape to the bag, because it still rubs in places.
Hi Ian how's it going' living on the rock does have one or two advantages most companie deliver and knock the VAT off!!!


NCC said:
Yup, Leven do them. Alternatively, a couple of black bin liners do a pretty good job too wink
I tried the black bin approach but didn't quite get on too well they kept flapping about in the wind as i struggled to hold on to the roof and place the bag on

Also not sure that it created the right look having such a great car and putting the roof into refuse sacks

LaserTam

2,183 posts

248 months

Sunday 2nd March 2008
quotequote all
Fine thanks Nick.

So has anyone tried to screw the rubber strips into the roof, to stop them popping out? Roof bag or not, they always come out a bit.

And another thing, any tips on glueing that rubber thing back onto the top of rear pillar. Always comes off...

madbadger

11,752 posts

273 months

Sunday 2nd March 2008
quotequote all
I tried screwing the strips in place, and they just pulled out anyway.

Pic of the boot mod if anyone hasn't seen it. 3 snall washers at the top of the black plastic strut.



smile

PYNEY

Original Poster:

1,048 posts

247 months

Sunday 2nd March 2008
quotequote all
great pic showing what to do !

madbadger

11,752 posts

273 months

Sunday 2nd March 2008
quotequote all
PYNEY said:
great pic showing what to do !
thumbup

O/T PYNEY - Why aren't you you bringing that fabulous Tam to Chatsworth?

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

We are in danger of being outnumbered by Saggys.

smile

PYNEY

Original Poster:

1,048 posts

247 months

Sunday 2nd March 2008
quotequote all
badbadger i'd love to go ! but its quite a way for me and i cant commit for that weekend as yet but you never know i might be there
your tamora looks great !!!!

madbadger

11,752 posts

273 months

Sunday 2nd March 2008
quotequote all
PYNEY said:
badbadger i'd love to go ! but its quite a way for me and i cant commit for that weekend as yet but you never know i might be there
your tamora looks great !!!!
Chatworth is only a couple of hours from anywhere, by Tam. wink Be good to see you there. It could be the biggest Tam meet ever.

Ta. biggrin

smile


bartesque

571 posts

232 months

Sunday 2nd March 2008
quotequote all
PYNEY said:
its quite a way for me!
confused

Pyney I could show you the way on my way past driving

perhaps best we travel in pairs It's been a while since I lived oop Northyikeslaugh