Discussion
I used standard/universal items you can pick up at any parts shop. Cut the end(s) for the right opening diameter. Main proplem is to get it to slide over the larger inside diameter end.
Tip 1: there are several quality universal gaiters out there - paying a little bit more gets you the ones that last longer than a year.
Tip 2: don't stretch the gaitors too much as it should have enough length in the first place, as they will slide of one end.
While at it is recommended to renew as much grease as possible, and avoid to get any dirt in there.
Rob (non-PAS 350i with cortina rack)
Tip 1: there are several quality universal gaiters out there - paying a little bit more gets you the ones that last longer than a year.
Tip 2: don't stretch the gaitors too much as it should have enough length in the first place, as they will slide of one end.
While at it is recommended to renew as much grease as possible, and avoid to get any dirt in there.
Rob (non-PAS 350i with cortina rack)
Edited by 350zwelgje on Sunday 2nd March 11:53
Gassing Station | Wedges | Top of Page | What's New | My Stuff