Z4 Xenon - switching beam for the continent
Discussion
A'noon all.
I recently bought a Z4C and the wife an I are off to France (+ Switzerland, Germany & Holland!) on Sat for a week's touring holiday and I noticed in the manual that I am able to switch the Xenon's from RHD to LHD which is a bit of a result. However, I've just been out to the car, unscrewed the panel in the wheel arch, but can't see the lever that I apparently need to flick. Has anyone else done this and can give me any tips on where I'm going wrong? I'm not the most mechanically minded person, but I'm willing to give stuff a try if I know I'm doing the right thing!
Cheers,
Nick
I recently bought a Z4C and the wife an I are off to France (+ Switzerland, Germany & Holland!) on Sat for a week's touring holiday and I noticed in the manual that I am able to switch the Xenon's from RHD to LHD which is a bit of a result. However, I've just been out to the car, unscrewed the panel in the wheel arch, but can't see the lever that I apparently need to flick. Has anyone else done this and can give me any tips on where I'm going wrong? I'm not the most mechanically minded person, but I'm willing to give stuff a try if I know I'm doing the right thing!
Cheers,
Nick
The adjuster is a very small, thin, metal tab adjacent to the bulb unit. It's easy to miss.
You have to take off the wheelarch panel, then remove the plastic headlight cover (secured with a metal spring), to get to it.
Don't bend it too much or it will snap off!
You have to take off the wheelarch panel, then remove the plastic headlight cover (secured with a metal spring), to get to it.
Don't bend it too much or it will snap off!
Edited by john_p on Monday 10th March 13:49
Gassing Station | BMW General | Top of Page | What's New | My Stuff