Exhaust mount bobbins
Discussion
Other than the usual suspects where can I go for the rubber bobbins that are used as exhaust mounts between the baffle box and mounting plate ? Wondered if they were a fairly standard exhaust mount off something Fordy or may be the exhaust fitters would have something simmilar.
Have found of recent that the local Landy / Ford parts departments have become a little less helpful if you go in clutching a part. Without a Model / year / Chassis number the computer can’t help. It seems in most places the old chap with who used to wear a brown storeman’s coat, moved slowly and knew where every part was has retired.
Have found of recent that the local Landy / Ford parts departments have become a little less helpful if you go in clutching a part. Without a Model / year / Chassis number the computer can’t help. It seems in most places the old chap with who used to wear a brown storeman’s coat, moved slowly and knew where every part was has retired.
That may well be what I should have but doesn’t look like what I do have. On mine there are two dome shaped rubber bits between which the flange attached to the exhaust is sandwiched then a bolt goes through the entire assembly. The ones I have look more like two enormous dome tap washers. From memory they are about 35mm in diameter and 20mm thick. How big are the ones you have Steve ?
Gassing Station | Griffith | Top of Page | What's New | My Stuff