Oil Breather pipe

[Mr M]

Seems to be the part that time forgot. Been around the obvious places and I get forwarded to somewhere else. Anyone know the part no or who's got one. Thanks.

Edited by Mr M on Tuesday 18th March 16:30

Edited by Mr M on Tuesday 18th March 16:30

[TT Tim]

Which Oil breather?

Tim

[Mr M]

Exiting the block next to the dip stick. Just seems to be weeping alot around the jubilee clip - which is tightly on. In fact it was my local independant that spotted it and was going to source one but I think he's a little too busy and has forgotten - so I thought I'd do it myself - presuming it's just a couple of jubilee clips.

[TT Tim]

Mr M said:

Exiting the block next to the dip stick. Just seems to be weeping alot around the jubilee clip - which is tightly on. In fact it was my local independant that spotted it and was going to source one but I think he's a little too busy and has forgotten - so I thought I'd do it myself - presuming it's just a couple of jubilee clips.

K, so yours is a late engine, i.e dipstick at the front?

You talking about the large dia pipe? Or the small one coming from the bottom of the air intake?

Small one is just a bit of hose, and the other is just an elbow, so take it off, take it to your local motor factors and see what they have on the shelf that you can cut up to match.

HTH

Tim

Edited by TT Tim on Tuesday 18th March 17:12

[Mr M]

Cheers. Yep dipstick at front and just above to the drivers side is the pipe. Elbow - 90 degreeish bend I presume you mean so yes that's it. Ok so just make one up would be easier. Thanks again.

Edited by Mr M on Tuesday 18th March 18:01