Door Panel Removal

[Cerberab]

Hi folks
Did a quick search to see if theres description on how to do this without breaking anything and came up with nowt - is there a standard procedure?
(I know, I know.... its a TVR, nothings standard...!)

Drivers door, if that makes any odds!

[FUBAR]

Only done it twice so hardly an expert, but from memory, undo the 4 hex screws underneath first, then the 3 by the lock. Then give it a wiggle with 1 hand while supporting the 'card' with the other

[BLUETHUNDER]

FUBAR said:

Only done it twice so hardly an expert, but from memory, undo the 4 hex screws underneath first, then the 3 by the lock. Then give it a wiggle with 1 hand while supporting the 'card' with the other

You mean you have actually done some work on your car??......Unbelievable!!!!

[jonbarrett]

Easy. From recollection allen key screws on underside and lock edge. Then lifts away.

[coey 4.2]

Also two more on top near the door hinges!
Be careful not to pull the wiring off that go to the speakers/mirror control,they just unplug.

[Ballsy]

There is a few posts that tell you how to do it, but if you have a wee look at the door its very easy to see how its done!!
Ohh and if your doing it you can mabye take some pictures and post them up here for future use for others

[morebeanz]

BLUETHUNDER said:

FUBAR said:

Only done it twice so hardly an expert, but from memory, undo the 4 hex screws underneath first, then the 3 by the lock. Then give it a wiggle with 1 hand while supporting the 'card' with the other

You mean you have actually done some work on your car??......Unbelievable!!!!

When he said from memory he was referring to remembering someone else's post on here...

[TT Tim]

Ballsy said:

There is a few posts that tell you how to do it, but if you have a wee look at the door its very easy to see how its done!!
Ohh and if your doing it you can mabye take some pictures and post them up here for future use for others

Good idea, start to the database, see my other post.

Tim