Number Plate

[dings]

I have a 95 plate and the number plate is on the grill , how easy is it to take it off there and put it on the lower valance I have seen a few with this, does it aid cooling putting it there and how do you fix it to the valance

[kevin63]

It's easy and all done with self tapping screws, could make number plate more vulnerable to braking or damage putting it lower down.

[Chimjunkie]

I've done this but used sticky backed velcro. Any curb or speed hump knocks cause no probs that way.

[Mr Nordic]

Mine is on withe DS tape and is fine, very secure.
IMHO it looks alot better lower down mounted, about 50/50 mounted on the lower bar under the grill mesh.

I think velcro sounds a good option too.

Mr N

[2 sMoKiN bArReLs]

dings said:

I have a 95 plate and the number plate is on the grill , how easy is it to take it off there and put it on the lower valance I have seen a few with this, does it aid cooling putting it there and how do you fix it to the valance

What's wrong with where it is? Cooling should be OK on a properly sorted car.

[MADMAX2]

I bought mine with the number plate lower down i took the plate off as it was cracked and got a new one from Castle TVR as i wanted it to match the rear to my horror the black numberplate holder was from a..............................




























































VOLVO







AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH

[raceboy]

Nothing to it.....



Drill two small pilot holes then screw in using normal number plate screws.
Mine sits at a slight angle but this has never been a big problem.
I did rip it off once, but this was a one off as I reversed over a gate post that just caught it and once ripped off the threads woulded hold so I had a wingnut on the back until I had it filled at a front end respray.