noble m12 noise from back drivers wheel

[simon chippy]

just had the car but noise coming from back wheel driver side only when moving like a sh sh sh jaked car up can not hear any noise thout it cauld be wheel bearing or hand brake bindig ?

[art411y]

dont know it this helps but i had the same sort of noise when i 1st had the car.turned out to be the braided hose to the rear caliper rubbing on the inside of the wheel.was lucky as the hose had just started to drip fluid

[steve_r]

Check the Hub nut, can cause that kind of noise when loose. Usually it is the n/s not drivers side which loosens though due to direction of thread.

[Pinnacle]

I would suggest you look at all befoe you remove the wheel, and then if nothing, remove the wheel and look for anything that could rub. If not that, then I would remove the rear hub and inspect the wheel bearing. I have had one go bad ( right rear, US spec ), and that is exactly what it sounded like. Took alot of silly sussing about to figure it out ( $$ ), but in the end thats what it was. The bearing is cheap, $50 US here, which means L25 there roughly, and just goes in / out with a press. Very simple. Given the bearings are so cheap, I would replace it even if just suspect.

Hope you sort it out. Cheers.