Window not dropping when door opens
Discussion
If it is dropping slightly (ie the window motor is functional) then a can of silicon spray just to lube up the window seals will sort the problem! Seems the motors are a little weak and it could just be that the window seal is dry and gripping the glass too hard and not forcing it down. If the motor has packed up, then egnore the above.
if its construction is the same a tuscan, the motor its on the out side of the door cavity in the middle just below the seal. ontop of the motor is an unprotected PCB, witch gets damp from any water going past the seal.
take door apart, clean / dry & protect the PCB
or
spray some electrical contact cleaner past the seal onto the PCB
hay presto smooth / responsive windows
custard
take door apart, clean / dry & protect the PCB
or
spray some electrical contact cleaner past the seal onto the PCB
hay presto smooth / responsive windows
custard
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff


