Radiator hoses 2.9
Discussion
Click on picture for larger view
Pictures of Original and Silicon hoses
12(a) and 14
32 and 33
1 (2 off)
5
same hose , other angle
Non shaped hoses : 26, 27, 28, 31, 34, 35, 36
Han
TVR Parts Cat | Partnr | Partname | Spec | Alt partnr | Qty |
---|---|---|---|---|---|
1 | S28K10018 | Radiator Hose | 90 long * 35 id / 105 long * 35 id | half of RH1702 | 2 |
5 | S28K10021 | Top Radiator hose (2.8 Only) | ? | ? | 1 |
5 | S28K10026 | Top Radiator hose (2.9 Only) | 160L*90*38id 90 deg "L" with a kink | RH1888 | 1 |
12 | S28K10020 | Bottom Hose (Pump To Pipe) 2.8 Only | ? | ? | 1 |
12A | S28K10024 | Bottom Hose (Pump To Pipe) 2.9 Only | 300 L (outside curve) x 35 id 135 deg "J" | ? | 1 |
14 | S28K10019 | Bottom hose (Pipe To Radiator) | 190 L (outside curve)x 35 id 135 deg "J" | RH1702 or OE P/N 90094679 V'hall | 1 |
26 | O25L143A | Overflow Hose (Upper- Swirlpot To Expansion Bottle) | Hose fuel 1 metre od 15 | BSAU 15 108/2-L4/C4R | 1 |
27 | O25L143A | Overflow Hose (Middle- Swirlpot To Thermostat Housing) | Hose fuel 30 cm od 15 | BSAU 15 108/2-L4/C4R | 1 |
28 | S28U10189 | Overflow Hose (Expansion Bottle) | braided pipe 1 metre 12 dia | ? | 1 |
31 | O25P021A | Hose (Swirlpot To Water Pump) Cut To Length | Loop shaped and twisted "U" x 16 id | 72EG18686AAG68580 * 1167 | 1 |
32 | - - | From waterpump to Thermostat | around 170L x 170 x 25 id 90 deg "L" but with a kink at the bottom connection | Motorcraft 89TF8548 AB F4SWD | 1 |
33 | - - | From bottom of waterpump area to steel pipe | 90 dia inside bend half round "U" x 15 id 180 deg. | ? | 1 |
34 | O25P021A | Heater hose matrix to valve | Ford hose , od 22 cut to length | 72EG18686AAG68580 * 1167 | 1 |
35 | O25P021A | Heater hose valve to engine block | Ford hose , od 22 cut to length | 72EG18686AAG68580 * 1167 | 1 |
36 | O25P021A | Heater hose matrix to coolant pipe | Ford hose , od 22 cut to length | 72EG18686AAG68580 * 1167 | 1 |
37 | - - | Ford solid coolant pipe | - | ford part number 6154329 | 1 |
Pictures of Original and Silicon hoses
12(a) and 14
32 and 33
1 (2 off)
5
same hose , other angle
Non shaped hoses : 26, 27, 28, 31, 34, 35, 36
Han
Edited by HvdWeerden on Tuesday 29th March 18:28
Superb Reference Han, well done.
heres a link for poor people like me who want to fit rubber hoses... the RH1888 and RH1702 hoses as bought.
http://ketvrin.myphotoalbum.com/view_photo.php?set...
K
heres a link for poor people like me who want to fit rubber hoses... the RH1888 and RH1702 hoses as bought.
http://ketvrin.myphotoalbum.com/view_photo.php?set...
K
Yep, some excellent info there. Now we have to fill in some gaps. Sorry Kevin but just to confirm, my factor friend Steve rang QH today, RH1888 and RH1702 are no longer available and QH wont be re-manufacturing. What I did however find out is that Gates (probably better known for drive belts) do still make a very wide range of hoses and I have been lent their catalogue. What a nightmare!!!! Steve has arranged to get in a couple of possible hoses to 'lend' me to see if they would be suitable. Mine is of course a 2.8 and I do recognise that there are significant differences in coolant piping.
On the 2.8 there is, for example, an 18mm pipe from the back of the thermostat housing up to a steel spigot under the water outlet housing on the top front of the inlet manifold. I am trying to source that one first as it is going on before I re-install the engine!
On the 2.8 there is, for example, an 18mm pipe from the back of the thermostat housing up to a steel spigot under the water outlet housing on the top front of the inlet manifold. I am trying to source that one first as it is going on before I re-install the engine!
hvdweerden said:
I'm just in the process of fitting my silicon hoses.In the above picture the 2 shorter pipes replace which numbers on the exploded view?
The second from the left labelled 13, seems to be to long to replace item 27 in the exploded view and then what is the right hand short hose for? or does the right hand hose replace item 27 as that seems to be a better length for that item.
Russ
Russ
Hello Russ,
Working from Han's photo, the 16mm hose on the left makes hoses 31 and 35. Hose 31 can be routed above the alternator like the original. The 13mm bore hose second from left doesn't fit anywhere.
The 8mm bore hose second from right does hose number 26. The 8mm bore hose on the right is hose number 27. Hoses nos 28, 34 and 36 are not supplied.
I arrived at this after much head-scratching, correspondence with Han and a discussion with Tim at ACT. Hopefully this will save you some time!
Regards,
Graham
Working from Han's photo, the 16mm hose on the left makes hoses 31 and 35. Hose 31 can be routed above the alternator like the original. The 13mm bore hose second from left doesn't fit anywhere.
The 8mm bore hose second from right does hose number 26. The 8mm bore hose on the right is hose number 27. Hoses nos 28, 34 and 36 are not supplied.
I arrived at this after much head-scratching, correspondence with Han and a discussion with Tim at ACT. Hopefully this will save you some time!
Regards,
Graham
RH1888 sometimes available from griffinpartsltd@aol.com as discovered by Don (Lewdon)
here
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
HTH
K
here
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
HTH
K
Gassing Station | S Series | Top of Page | What's New | My Stuff