Mk1 engine swap - auto to manual

Mk1 engine swap - auto to manual

Author
Discussion

TigerK

Original Poster:

4,294 posts

257 months

Thursday 3rd April 2008
quotequote all
Hi all wavey

My first post in this section

A friend has bought a MK1 MX5 1.6 with a seized engine, and has been offered a replacement engine which comes from an automatic. Usually I'd expect the differences to be in the gearbox, but are there any differences between an auto and manual engine which he should look out for? I'm thinking engine management systems etc...

Thanks in anticipation of your replies

Kevin

paulmurr

4,203 posts

213 months

Thursday 3rd April 2008
quotequote all
I could be wrong but I think the auto has different cams and different engine management.

Wouldn't it be easier to look for an engine from a manual car? There must be plenty about.

ETA - Hello byebye

Edited by paulmurr on Thursday 3rd April 09:47

TigerK

Original Poster:

4,294 posts

257 months

Thursday 3rd April 2008
quotequote all
Thanks Paul, much appreciated. I thought as much

regards

Kev

MX-5 Lazza

7,952 posts

220 months

Thursday 3rd April 2008
quotequote all
The auto engine is different from the manual engine.
It has different cams and runs at lower compression to move the torque curve down the rev-range to suit the auto-gearbox.
It is a good choice of engine if you are planing to turbo or supercharge but otherwise don't bother as it is down on power from a manual engine.

TigerK

Original Poster:

4,294 posts

257 months

Thursday 3rd April 2008
quotequote all
Thanks again.

The hunt for a manual engine has begun wink

Kev