How to fit correctly the 3 lights support thing ????

[supercopa]

on my Tuscan MK1, the part above the steering wheel which has the three lights on it (you know with the orange and red light coming on if you are to high in rpms) is not properly centered...

it rotates to the left which is awful to see and annoying all the time. I don't understand how it should be maintained in order to be properly centered with no rotation.

anyone could help me with this? perhaps someone who has pictures?

thanks et lot.

[so called]

Mine is loose as well. How many screws are holding yours on. I think that mine has three which appear to be inserted from inside the dash pod.
Thats why I have never got round to tightening them.

When you say it rotates, it sounds like you have screws completely out.

Sorry I dont have any better information.
Have you considered giving TVR Power a phone call.
They may be able to advise you over the phone.
If your English is as good as you write, you should be OK.

[supercopa]

thank you for your answer.

I'm looking after pictures of a right mounted pod on a Tuscan Mk1 in order to do the same on mine.

Does anyone have some? It would be very usefull for me.

[davido140]

HTH srry.

eta its what hold my car together, that and evostick!

Edited by davido140 on Monday 14th April 17:38

[so called]

davido140 said:

HTH srry.

eta its what hold my car together, that and evostick!

Edited by davido140 on Monday 14th April 17:38

Have you realy stuck yours down with NoMoreNails ?
You have got me wondering why not ?

[davido140]

I did lots of bits of re-sticking bits and bobs with no more nails, the bigger bits of leather and vinyl were much easier to stick with no more nails than anything else I tried!

I cant remember what I used on the shift-up light though, I think it might have been evo-stick, I definitley used that to stick the pod "surround" back to the pod itself.

[so called]

OK thats cool.

Its pointed me in the right direction on how to fix one or two issues.
But back to you Supercopa, can you get no more nails.
I will try and get some info on the gear change indicator thing when I get to the UK later this week.

[tuscan_al]

Yes i used superglue on my bit, the metal thing holding up the three light pod was spinnign and lifting, dab of locktight later... not