Nitrons

[daddysumo]

Has anyone got any settings for Nitrons Please ?

Steve

[rort1]

not sure if they are generic or bespoke but I was advised ( clicks out F then R)

Dry -8 -14
Wet -10 -18
Track -4 -10

I have found dry settings too harsh for B roads so have gone to -9 -15 for day to day and so far so good

[alex s]

daddysumo said:

Has anyone got any settings for Nitrons Please ?

Steve

Will dig them out(these were done by Andy Walsh)
Those settings for the track look well off for the Noble!!

[daddysumo]

ll dig them out(these were done by Andy Walsh)
Those settings for the track look well off for the Noble!!
[/quote]

Yes please Alex ! All help greatly appreciated as I want to get the uprights off, machined, back on and the whole lot set up asap!

Steve

[Biggriff]

As I just got a set that would be good

[rort1]

I'll defer to better knowledge on this - my settings came from the installer and Ive only had my Nitrons for a couple of months now and havent been out on track yet - I'll be interested to see what settings you have

R

[alex s]

Dug out the settings,

From Andy:-

All figures are based on the damper being turned to full hard. Then start counting the clicks as you work backwards

Road use FRONT: 13 clicks from hard REAR: 12 clicks from hard


Track use 8 clicks from hard all round


I recommend that you build up to the track settings as the car grips more but the transition into oversteer/understeer becomes quicker when you reach the limit.

Edited by alex s on Monday 28th April 18:45

[daddysumo]

Thanks Alex