ACT induction upgrade advice please
Discussion
I have done quite a bit of work to my 98 450, AP Race brakes (340mm), Nitrons, and loads of maint work including replacement camm, pre-cat removal and a slightly modified TVR power chip.
Anyone done the ACT induction upgrade on a 450, is it a big difference and what else will have to be changed to deal with the power. Also, any problems with ins.
Anyone done the ACT induction upgrade on a 450, is it a big difference and what else will have to be changed to deal with the power. Also, any problems with ins.
I'll hopefully have my car back on Friday following:
MA chip
Uprated injectors
Uprated AFM
ACT trumpets
... so expect a report to pop up over the weekend!
Managed to hold off on going for a full ACT induction system, though it took some doing. I daresay I'll be calling Tim for twin throttle and carbon plenum by the end of the year
I'd suggest giving Tim and/or Mark Adams a call to discuss your plans. They're both very happy to talk through possible upgrade routes without any sort of hard sell.
MA chip
Uprated injectors
Uprated AFM
ACT trumpets
... so expect a report to pop up over the weekend!
Managed to hold off on going for a full ACT induction system, though it took some doing. I daresay I'll be calling Tim for twin throttle and carbon plenum by the end of the year
I'd suggest giving Tim and/or Mark Adams a call to discuss your plans. They're both very happy to talk through possible upgrade routes without any sort of hard sell.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff