I want to lower my Z3

[5upra]

I want to lower my Z3 and have seen an ad for a set of Jamex lowering springs. They lower the car by 45mm at the front, and 30mm at the rear. I have a 2002 3.0i with the standard 17" wheels and rubber.

Has anyone done this to their Z3 and if so will it create a problem at all ? ( apart from a harsh ride and being closer to the ground !

[stesrg]

5upra said:

I want to lower my Z3 and have seen an ad for a set of Jamex lowering springs. They lower the car by 45mm at the front, and 30mm at the rear. I have a 2002 3.0i with the standard 17" wheels and rubber.

Has anyone done this to their Z3 and if so will it create a problem at all ? ( apart from a harsh ride and being closer to the ground !

Hi my car has k&w coil over and ebach springs /struts, the chassis is fitted with strengthning angle kit from the states, the car is very low inded handeling is fantastic however gets grounded on speed humps , getting on and off the ferrie, and some sharp drives /pavements. 17" wheels and 40 profile tyres ... It can be a pain sometimes but its what you have to put up with for ultimate handeling z3!!!

Ste .