Anyone needing a Tasmin Bonnet?

[jagdpanther]

Was left behind when the Tasmin was taken away to Holland

Series 1.5 Tasmin 280 bonnet in blue complete with bonnet clips

Small amount of damage to top edge

[jagdpanther]

No takers....might hang it on the wall

[grahamw48]

What about zcar, who's wanting to put the vents in ?

Actually, when I read his post I was wondering about swapping bonnets around, as wasn't it just the lengths of noses ahead of the bonnets which were varied ?

I should have measured em when I owned a series 1 280FHC (which has loads of nice vents) and the series 2 390SE, at the same time.

[tbdgriff500]

i would be interested if still available and free to collect, as i want to modify one for the race car,
cheers
tim.

[jagdpanther]

tbdgriff500 said:

i would be interested if still available and free to collect, as i want to modify one for the race car,
cheers
tim.

Still have it, sat in Huddersfield!

Collection isnt a problem

If it isnt wanted, its getting polished and hung on the wall

[tbdgriff500]

just seen how far north you are so it sort of rules me out, unless you want to bring it along to the tuscan challenge at anglesy in july or oulton park in october,
cheers
anyway
tim.

[BadRedWedge]

jagdpanther said:

tbdgriff500 said:

i would be interested if still available and free to collect, as i want to modify one for the race car,
cheers
tim.

Still have it, sat in Huddersfield!

Collection isnt a problem

If it isnt wanted, its getting polished and hung on the wall

Make a great sledge (if ever it snows) I used to use a bonnet from a moogy 1000 ........ perfect, but a Wedge bonnet would seat about 4 easy

[grahamw48]

Yes, but the Moggy's didn't have VENTS !

[jagdpanther]

tbdgriff500 said:

just seen how far north you are so it sort of rules me out, unless you want to bring it along to the tuscan challenge at anglesy in july or oulton park in october,
cheers
anyway
tim.

Hmmmm depends entirely on what Im driving as I KNOW it wont fit in the Battlecruiser and I dont have a van or estate

BadRedWedge said:

Make a great sledge (if ever it snows) I used to use a bonnet from a moogy 1000 ........ perfect, but a Wedge bonnet would seat about 4 easy

Nooooooooooooooooooo

2nd person to say that

Could make for good publicity:

TVR Makes Super-quick sledge


No thanks, the last time I went sledging, I ended up having 25 stiches without anaesthetic

[Poledriver]

has this one got vents in?

[jagdpanther]

Poledriver said:

has this one got vents in?

Top and bottom

The top piece on the NS vent has broken, but Im sure can easily be put right

[Poledriver]

Definitely interested, I want to get cool air to the intakes, I'll need to get it resprayed but mine needs it anyway. I'm going up North in thr next couple of weeks!
How much do you want for it and can you hang on to it for a little longer?

[jagdpanther]

Poledriver said:

Definitely interested, I want to get cool air to the intakes, I'll need to get it resprayed but mine needs it anyway. I'm going up North in thr next couple of weeks!
How much do you want for it and can you hang on to it for a little longer?

Make me an offer bud...

[Poledriver]

PS. I assume it'll fit on here?

[jagdpanther]

Poledriver said:

PS. I assume it'll fit on here?

Probably best asking someone like Graham Walden or Steve Heath fella

[red tasmin]

Hi, ive got a series 1 350 bonnet with centre bulge and 2 vents at sides in red, still on car would swap for series 2 bonnet.

[Poledriver]

red tasmin said:

Hi, ive got a series 1 350 bonnet with centre bulge and 2 vents at sides in red, still on car would swap for series 2 bonnet.

You probably wouldn't like mine, it's got a scoop in the middle to clear the higher plenum!

[red tasmin]

I've got a series 2 bonnet in blue, just thought this may save me having to paint it, never mind!

[jagdpanther]

You gots offers Poledriver

[Poledriver]

jagdpanther said:

You gots offers Poledriver

OK, Give me a starting figure.