Boot Solenoid/actuator

[Groomvroom]

After a whole heap of trouble resulting from a stuck boot release switch, last job is tofit a new boot opening actuator. The original is a two wire the replacment is a five wire. What wires do i need to use to save me opeming it up? I have green, black, blue, white nd brown.

[David Beer]

Are they aaranged in a 3 and 2 ? If so the 2 are the ones you need, if it goes out instead of in, simply reverse the connections.

[Groomvroom]

David Beer said:

Are they aaranged in a 3 and 2 ? If so the 2 are the ones you need, if it goes out instead of in, simply reverse the connections.

Five seperate wires, however the situation has got a tad more serious, see my other post. Got the hot start kit BTW, will be fitting it to the Chim tomorrow asuming im not cutting holes in the Griff!

[David Beer]

Switch your multi meter to ohms, you should read 35 ohms across the green and blue. If not just play around until you find that reading.

[Groomvroom]

David Beer said:

Switch your multi meter to ohms, you should read 35 ohms across the green and blue. If not just play around until you find that reading.

Sorted, I called TVR Car Parts who supplied it, they confirmed green and blue. On and working, Thanks David.