Here we go....never simple is it?
Here we go....never simple is it?
Author
Discussion

coetzeeh

Original Poster:

2,890 posts

266 months

Friday 16th May 2008
quotequote all
I had the battery replaced today at my local garage.

Driving home I noticed that the ice detector light was on? Then the hazards started flashing for no reason, and then switched off, only to come back on again at some point.

Got home, hazards are now staying off, but the ice detector light stays on, and the flashed rapidly a few times - this cycle repeats itself.

Am I supposed to reset anything now that the battery has been replaced?

coetzeeh

Original Poster:

2,890 posts

266 months

Friday 16th May 2008
quotequote all
OK, my mistake, it is not ice detector, it is infact the alarm light flashing...

Barreti

6,689 posts

267 months

Friday 16th May 2008
quotequote all
It sounds like your alarm is having a strop.
When mine did this I had to cover the alarm with as much fabric as I could get around it to muffle it and disconnect the car battery overnight.
This let it whine all night to flatten its internal battery so it would reset when I reconnected the car battery.

zippy500

1,883 posts

299 months

Friday 16th May 2008
quotequote all
I would suggest the garage have dislodged some wires while messing about, the loom sits on top of the battery, just have a look and make sure all the relays and fuses are seated correctly.

Gsw500

656 posts

269 months

Friday 16th May 2008
quotequote all
zippy500 said:
I would suggest the garage have dislodged some wires while messing about, the loom sits on top of the battery, just have a look and make sure all the relays and fuses are seated correctly.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Yep.. Exactly that.

I put a new uprated battery on mine at the weekend and had to reposition the ECU and loom as it was slightly higher than the old one.
Had exact same symptons as you describe.

Check and check again all those loom and relay connections plus make sure the ecu is securely plugged into the loom.

If its like mine you will find the loose connection and it will right itself.
HTH.

Gsw500 biggrin

Simpo Two

92,820 posts

295 months

Friday 16th May 2008
quotequote all
coetzeeh said:
OK, my mistake, it is not ice detector, it is infact the alarm light flashing...
Mine's been doing it for months. The zapper broke years ago so I can't do much about it. Car still works so I'm not too bothered.

coetzeeh

Original Poster:

2,890 posts

266 months

Saturday 17th May 2008
quotequote all
I cycled the immob and alarm a few times and the problem has gone away.

Just to be doubly sure I will check the relays and connections - there may be a dodgy one like you guys suggested.

Thanks for the help.

Henk