P*ssed off ......Door glass
Discussion
Picked up car from garage after fuel lines replaced,need to go back and have swirl pot replaced.
Went to lower drivers side window,it started lowering then slowed right down then BANG ! shattered in zillions of peices.
Just spent the morning clearing the glass from inside the car and inside the drivers door.
Rac windscreens (my insurers approved suppliers) are on the hunt for a 87 tasmin door glass.
Why it exploded like that i havnt got a clue.
Went to lower drivers side window,it started lowering then slowed right down then BANG ! shattered in zillions of peices.
Just spent the morning clearing the glass from inside the car and inside the drivers door.
Rac windscreens (my insurers approved suppliers) are on the hunt for a 87 tasmin door glass.
Why it exploded like that i havnt got a clue.
Edited by Mystic Slippers on Thursday 22 May 23:01
Thanks for the info.Have pm`d phil just incase rac auto windsreens? cannot locate one.
Had a look at the door mechanism but to my untrained eye it looks ok.
The part that hold the glass looks like it was filled with a mastic/putty type stuff is that the norm for securing the glass at the bottom?
Thinking about it iwonder if the rubber seals that are attached to the door card "gripped" the glass to much which caused it to come unstuck from the lifting rail/runner-then it dropped causing it to shatter ??
It scared me a bit and makes me hesitant to operate the passenger side window now!
Had a look at the door mechanism but to my untrained eye it looks ok.
The part that hold the glass looks like it was filled with a mastic/putty type stuff is that the norm for securing the glass at the bottom?
Thinking about it iwonder if the rubber seals that are attached to the door card "gripped" the glass to much which caused it to come unstuck from the lifting rail/runner-then it dropped causing it to shatter ??
It scared me a bit and makes me hesitant to operate the passenger side window now!
Mystic Slippers said:
Thanks for the info.Have pm`d phil just incase rac auto windsreens? cannot locate one.
Had a look at the door mechanism but to my untrained eye it looks ok.
The part that hold the glass looks like it was filled with a mastic/putty type stuff is that the norm for securing the glass at the bottom?
Thinking about it iwonder if the rubber seals that are attached to the door card "gripped" the glass to much which caused it to come unstuck from the lifting rail/runner-then it dropped causing it to shatter ??
It scared me a bit and makes me hesitant to operate the passenger side window now!
Just nail it shut, it'll be fine.Had a look at the door mechanism but to my untrained eye it looks ok.
The part that hold the glass looks like it was filled with a mastic/putty type stuff is that the norm for securing the glass at the bottom?
Thinking about it iwonder if the rubber seals that are attached to the door card "gripped" the glass to much which caused it to come unstuck from the lifting rail/runner-then it dropped causing it to shatter ??
It scared me a bit and makes me hesitant to operate the passenger side window now!
MikeyB
Got new glass fitted today
many thanks to 530dTPhil for sorting me one out.
Glass now lowers fine but still a strain when raising back up, The fitters tried thier best to make it work better have advised me to get a new mechanism.
Got one ordered today from rimmer bros-good price!
mood:- im getting there just new swirl pot and fix r/h indicators which started playing up today

many thanks to 530dTPhil for sorting me one out.Glass now lowers fine but still a strain when raising back up, The fitters tried thier best to make it work better have advised me to get a new mechanism.
Got one ordered today from rimmer bros-good price!
mood:- im getting there just new swirl pot and fix r/h indicators which started playing up today

Gassing Station | Wedges | Top of Page | What's New | My Stuff




