why Wllwoods ?
Author
Discussion

bulldog 1

Original Poster:

76 posts

222 months

Sunday 18th May 2008
quotequote all
Looked at an Ultima which had a set of 'Wilwood Light' calipers. I thought that GTR's only ran 'AP 's', but i suppose any good breaking system would do. Is there any hard and fast rule for using one manufacturer as opposed to the other ?

Are the cooling fans used by these cars sufficient enougth to keep the engine cool if the car is stationary for long periods of time i.e. heavy traffic? It may just be that these cars never find themselves in that position, but, if ever it was the case, it would be good to know that there would be no over-heating issues, typical of American V8's.

absolutely

3,168 posts

221 months

Sunday 18th May 2008
quotequote all
They are good quality brake systems. Ultima may have "professional differences" between themselves and AP?

jschwartz

836 posts

287 months

Sunday 18th May 2008
quotequote all
I've got the factory rad and fans on my 1003 HP ls2 TT.
No probs at all with overheating.

738 driver

1,202 posts

222 months

Wednesday 21st May 2008
quotequote all
So, what other good brake systems have the Ultima guru's installed and to what advantage, cost, efficiency etc?

# Lord Lucan #

234 posts

220 months

Wednesday 21st May 2008
quotequote all
Wilwoods are a cheaper option tbh made just as well with pistons virtually the same as the equivalent AP calliper I think alot of it is to do with the fact Wilwood are made in the USA where raw materials are probably cheaper than in the UK where AP manufacture as long as you bed in the brakes in the correct manner then you should never have any issues with any brake set up all it is about is which brand you prefer at the end of the day other than that it is a brand name thing personally I like Wilwoods better also they are cheaper by a mile

absolutely

3,168 posts

221 months

Wednesday 21st May 2008
quotequote all
Mallock use them as the "uprated"system on their race cars.

As for cost, remember Ultima are a manufacturer and will try to keep costs down, they won't comprimise the safety of a customer but they will use the cheaper product where ever possible.

Steve_D

13,802 posts

287 months

Wednesday 21st May 2008
quotequote all
absolutely said:
Mallock use them as the "uprated"system on their race cars.

As for cost, remember Ultima are a manufacturer and will try to keep costs down, they won't comprimise the safety of a customer but they will use the cheaper product where ever possible.
absolutely said:
They are good quality brake systems. Ultima may have "professional differences" between themselves and AP?
Am I reading these comments the wrong way or has Absolutely got it the wrong way round?

AP are the brakes Ultima supply.

They may have used Willwood in the distant past but I don't believe they offer them now.

Steve

absolutely

3,168 posts

221 months

Wednesday 21st May 2008
quotequote all
Steve_D said:
absolutely said:
Mallock use them as the "uprated"system on their race cars.

As for cost, remember Ultima are a manufacturer and will try to keep costs down, they won't comprimise the safety of a customer but they will use the cheaper product where ever possible.
absolutely said:
They are good quality brake systems. Ultima may have "professional differences" between themselves and AP?
Am I reading these comments the wrong way or has Absolutely got it the wrong way round?

AP are the brakes Ultima supply.

They may have used Willwood in the distant past but I don't believe they offer them now.

Steve
Cheers for clearing that up Steve!