Axle ratio

[rev-erend]

Anyone know what the axle ratio is on the SEAC .. probably the same as the 400SE ..

I'm thinking it 3.09 but just need to confirm it to calculate gearing figures.

Thks.

[shpub]

3.54 or 3.33 or... what ever they had. PS don't go by the tag, it is often wrong. Jack it up turn the input shaft and count the wheel revs.

[beastie]

google says 3.07...

[rev-erend]

shpub said:

3.54 or 3.33 or... what ever they had. PS don't go by the tag, it is often wrong. Jack it up turn the input shaft and count the wheel revs.

So - 1 turn of the prop shaft should turn the wheel 3.?? times..

[rev-erend]

shpub said:

3.54 or 3.33 or... what ever they had. PS don't go by the tag, it is often wrong. Jack it up turn the input shaft and count the wheel revs.

So - 1 turn of the prop shaft should turn the wheel 3.?? times..

[shpub]

No.... one turn of the wheel will turn the prop shaft 3.XXXX times. Unless you've got the diff in the wrong way.

[adam quantrill]

Is this assuming both wheels turn by the same amount?

If only one is jacked up then you might have to halve the final figure.

Oh - and do 10 revs of the prop shaft for a more accurate result.

[rev-erend]

shpub said:

No.... one turn of the wheel will turn the prop shaft 3.XXXX times. Unless you've got the diff in the wrong way.

Yep - should have guessed that ..

[rev-erend]

adam quantrill said:

Oh - and do 10 revs of the prop shaft for a more accurate result.

Yes - had figured on doing the 10 revs trick..