98 4.2 replaced battery now it wont start
Discussion
hi all
can anybody give me some advice?
i have a 98 4.2 cerbera
the battery was not holding a charge
so i replaced it today
it fired up 1st turn so i was happy ( job done )
it ran for about 5 mins then it cut out now it wont fire atall ( gutted )
there are a few factors that may be relavent
1. the new battery turns the car over much much faster than the old one ( though im sure that is a good thing )
2. i removed the engine bay cover under the windscreen
and it was off a few days ( and yes it rained )
so i thought it may be the coil packs
thought it is not even trying to misfire
3. i have recently replaced the oil pressure sender switch
iit had been running fine after this ~( could i have dislodged somthing? )
4. i have check the big fuse its fine
5. has my car got a emergency cut off switch anywhere?
though there does seem to be fuel at the injectors
any advice would be greatfully received
thanks in advance Dave
can anybody give me some advice?
i have a 98 4.2 cerbera
the battery was not holding a charge
so i replaced it today
it fired up 1st turn so i was happy ( job done )
it ran for about 5 mins then it cut out now it wont fire atall ( gutted )
there are a few factors that may be relavent
1. the new battery turns the car over much much faster than the old one ( though im sure that is a good thing )
2. i removed the engine bay cover under the windscreen
and it was off a few days ( and yes it rained )
so i thought it may be the coil packs
thought it is not even trying to misfire
3. i have recently replaced the oil pressure sender switch
iit had been running fine after this ~( could i have dislodged somthing? )
4. i have check the big fuse its fine
5. has my car got a emergency cut off switch anywhere?
though there does seem to be fuel at the injectors
any advice would be greatfully received
thanks in advance Dave
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


