Quiet Silencers for LS 7?
Quiet Silencers for LS 7?
Author
Discussion

Rusti Evo

Original Poster:

537 posts

223 months

Tuesday 24th June 2008
quotequote all
Just planning the exhaust for the LS 7 and was looking for advice.

It is essential that the exhaust gives sub 98db to allow use at Goodwood and Top Gear. I believe that the LS 7 is naturally quiet with the cats but has anybody got any experience and sound figures?

The engine is bog standard (for reliability) and should have about 540bhp ish.

Stuart


GTWayne

4,595 posts

246 months

Tuesday 24th June 2008
quotequote all
Rusti Evo said:
sub 98db to allow use at Goodwood and Top Gear
I do believe that GTRSimons LS powered Ultima was remarkably quiet when tested at Stonleigh last month and that runs cats yes

Rusti Evo said:
...bog standard...540bhp ish...
How long have we been waiting to here that type of claim 'eh?

LuckyP

6,243 posts

254 months

Tuesday 24th June 2008
quotequote all
Have a chat with Charles Dunn. He seems to think (like a lot of peeps on here) that a cross over system is the way to go.

Boosted LS1

21,200 posts

289 months

Tuesday 24th June 2008
quotequote all
I like the idea of a cross over system and maybe some Borla's. Being more street biased they could be quieter?

ROWDYRENAULT

1,294 posts

243 months

Wednesday 25th June 2008
quotequote all
Hi Guys. Summit Racing sells a cone that goes into the back of the tail pipe it is pointed towards the engine an has a bunch of holes in it. Its made of stainless steel. Now I have no idea how much back pressure it builds but I can tell you that it made a difference in the sound level in my car. That said if you drilled and tapped the exhaust pipe you can install these in about 5 minutes. Might beat the heck out of missing a day at the track. Lee

Steve_D

13,802 posts

287 months

Wednesday 25th June 2008
quotequote all
ROWDYRENAULT said:
Hi Guys. Summit Racing sells a cone that goes into the back of the tail pipe it is pointed towards the engine an has a bunch of holes in it. Its made of stainless steel. Now I have no idea how much back pressure it builds but I can tell you that it made a difference in the sound level in my car. That said if you drilled and tapped the exhaust pipe you can install these in about 5 minutes. Might beat the heck out of missing a day at the track. Lee
That's been done.
The guinea pig is now the owner of a melted rear clip garden ornament.

Steve

Rusti Evo

Original Poster:

537 posts

223 months

Wednesday 25th June 2008
quotequote all
ROWDYRENAULT said:
Hi Guys. Summit Racing sells a cone that goes into the back of the tail pipe it is pointed towards the engine an has a bunch of holes in it. Its made of stainless steel. Now I have no idea how much back pressure it builds but I can tell you that it made a difference in the sound level in my car. That said if you drilled and tapped the exhaust pipe you can install these in about 5 minutes. Might beat the heck out of missing a day at the track. Lee
Hi Lee. Are these SuperTrapps or has Summit got something new?

I have been experimenting with a set of 4inch trapps and as you say the noise reduction to the ear is very good - less so to the meter - only shows about 2db. I reckon I can feel a power reduction but am guessing most of that is just because the soundtrack is much softer.

Bill Lackey had great success with the 3inch size on his LS. However I'm guessing the 3inch must have had awesome backpressureeekeekeek

Stuart


GTR One

216 posts

246 months

Wednesday 25th June 2008
quotequote all
Rusti Evo said:
I believe that the LS 7 is naturally quiet with the cats but has anybody got any experience and sound figures?
Lol..My cat'd LS7 failed it's SVA yesterday on noise! 103dB

Rusti Evo

Original Poster:

537 posts

223 months

Wednesday 25th June 2008
quotequote all
GTR One said:
Rusti Evo said:
I believe that the LS 7 is naturally quiet with the cats but has anybody got any experience and sound figures?
Lol..My cat'd LS7 failed it's SVA yesterday on noise! 103dB
Hell, that must have been very irritating. What exhaust do you have?

Also, what distance do they measure it at? I've been lead to believe they measure at 1m rather than the 0.5m used by trackday types.

GTR One

216 posts

246 months

Wednesday 25th June 2008
quotequote all
It's measured at 0.5m (at 45 deg angle) for the SVA.

Yeah, it was annoying! I have a Spectrum 5 exhaust with Edlebrock silencers. First fix is to fit a Jetex decibel insert for the SVA test. A cross link between the two banks would do a lot too I reckon.

Engine capacity has a lot do do with noise as the exhaust mass flow at a certain rpm will be higher, so more silencing required. Generally though, my LS7 has been reasonably quiet!

Liam