ECU fault code reader.. recommendations, advise please

[m4rk]

Hi,

I'm looking for a ECU fault code reader for my 1994 Chim 500. 14CUX AMR2175 ECU and it has the black 4 pin plug in the wiring loom for this. Has anyone any experiences of the below or have any others you think I should take a look at? Thanks. Mark

1. code reader OBD 2 This seems good but not sure if OBD2 readers will work on my car??
2. code reader Land Rover
3. code reader OBD 2
4. BITS out of stock

Edited by m4rk on Friday 4th July 09:03

[Cider Andy]

First one is no good, as it has an OBD2 interface, the 14CUX doesn't. The second one works fine and at $99 is a good price. The third one works in the same way as the second.

[Cider Andy]

OK, so you edited it while I was replying! 2, 3 and 5 all do the job, 1 and 4 don't.

[Cider Andy]

You've edited it again! I give up.

[m4rk]

Sorry Andy,

Tidied my post up a bit while you were typing.

Just to confirm. OBD 2 readers will not work with TVR. I must get an Landrover OBD reader. 100 USD is a good price for this.

[Cider Andy]

Yes, exactly. They normally end up at around £100 on eBay UK, so that's a good price.