Pool heater not working - any experts?
Pool heater not working - any experts?
Author
Discussion

5MUG

Original Poster:

734 posts

295 months

Saturday 26th July 2008
quotequote all
Hello all
yet again we have dragged the above-ground pool out of its winter hibernation. But the heater is not working. It is an 18ft diameter pool and the heater is only 3kw so I suspect last year's heating of the pool was just too much for it.

I asked the man in the pool shop and he said it was not worth checking the element and that I should buy a new heater (£150 from him and only £60 on ebay!!! what a rip-off).

Can anyone advise me on the best course of action bearing in mind I am a farmers wife (ie no husband until October) albeit a fairly practical one!?
Help........... thanks. S

tomTVR

6,909 posts

272 months

Saturday 26th July 2008
quotequote all
Pistonheads - Swimming Pools Matter

Edited by tomTVR on Saturday 26th July 13:38

theaxe

3,571 posts

253 months

Saturday 26th July 2008
quotequote all
Check the fuse? If that's okay for the sake of 60 quid just get a new one...

Autonotiv

2,673 posts

255 months

Saturday 26th July 2008
quotequote all
if that one is broken, then why can't you just get a bigger one say 5Kw?

then it would heat the pool quicker, will it not?

I am no plumber, have no intrest in plumbing and have a mate that does all my plumbing work.

Flintstone

8,644 posts

278 months

Saturday 26th July 2008
quotequote all
Pools are the work of the devil. The in-ground one I had in Australia was a big enough pain so there's no way I'd have one here. In fact, looking for property recently I told the estate agent I did NOT want one and got the look reserved for those who say things like "Is that one near the school? Maybe I should mention that I'm on the sex offenders register?".


Back to the original question, I'd go with an upgrade from Fleabay. Actually, no I wouldn't. I'd throw the whole thing away biggrin

5MUG

Original Poster:

734 posts

295 months

Saturday 26th July 2008
quotequote all
Thanks all - I think!?

RRH

619 posts

278 months

Monday 28th July 2008
quotequote all
Our first pool heater (for a 15' dia pool) was 3kw but wasn't thermostatically controlled; not that it was ever going to get it hot enough to evaporate...

I bought a 5kw heater last year off ebay, plumbed it in, but the cable got real hot so I disconnected it. That was at the end of the season- kids went back to school and I didn't think too much more about it.

I came to hook it up last week as its school hols, and we don't go away for a couple of weeks, but thought I'd consult my friendly neighbourhood electrician. He said that I would have probs with 5kw as its doubtful the ring main in the garden would be up to it...

Anyway, I bought another 3kw on ebay on Thursday - it arrived on Friday - £30 inc delivery (and with a built in thermostat). Same as this, but I found it cheaper from another seller http://cgi.ebay.co.uk/O-BLUE-3KW-SMIMMING-POOL-HEA...

Unfortunately it arrived damaged but a replacement is on its way..

I used the old non-thermo heater over the weekend, switching it on at about 11pm and off at about 8am, and it seems to be increasing the temp by about 3 degrees a day.

Hope this helps.


Smart roadster

769 posts

257 months

Monday 28th July 2008
quotequote all
I know nothing about pool heaters but 3Kw is about the most power you can draw from a normal 13Amp socket. 5Kw is going to draw about 20Amps so some chuckier wiring will be required.

big_treacle

1,727 posts

291 months

Monday 28th July 2008
quotequote all
I got a 3kw heater for an outdoor pool. Sometimes after switching on I find I need to dial the thermostat to off & then back up again for it to work. Try that.