Oiling worktops - linseed or danish?
Oiling worktops - linseed or danish?
Author
Discussion

zcacogp

Original Poster:

11,239 posts

275 months

Tuesday 29th July 2008
quotequote all
Chaps,

One for the kitchen fitters amongst us, or those who are more au fait with woodwork than I am ...

I recently fitted a new kitchen in zcacogp-Towers, and mightily pleased with it I am. It has solid oak worktops, which look the business.

These oak worktops need to be treated with linseed oil, as per the instructions. Supposedly once a month for the first 12 months, then once every 2 months.

Treating them isn't a problem. The oil is. It takes a VERY long time to dry. The instructions are to apply it with a brush or rag, thinly, and then polish off the excess 20 minutes later. It is meant to be usable withing an hour, but in practice it stays sticky for a good 48 hours or more, which means we can't use them as we'd like to. I have tried diluting the linseed oil 50:50 with white spirit, which makes it dry fractionally quicker but only fractionally. (We were away for the weekend a couple of weeks ago, so treated it on Friday evening before we left and it was still perceptibly sticky to the touch when we got back on Sunday afternoon.)

One suggestion has been to use danish oil instead of linseed oil. Would this work? Would this dry any quicker? Would this protect the surfaces sufficiently? Would I have to remove all the linseed oil from previous applications before applying danish oil?

Alternatively, does anyone have any suggestions as to what I am doing wrong, and why it is taking so damned long to dry?

Should anyone be interested, here is a piccie of some of the worktop soon after installation:




Oli.

honest_delboy

1,774 posts

231 months

Tuesday 29th July 2008
quotequote all
we used Danish oil on our worktops, dries overnight.

Nice kitchen BTW

Olf

11,978 posts

249 months

Tuesday 29th July 2008
quotequote all
Havig very much the same dilema in my Kitchen. We're using Liberon Finishing Oil but as you say it's a pain in the arse.

tonyvid

9,889 posts

274 months

Tuesday 29th July 2008
quotequote all
I used Danish oil on my surfaces and it dries quickly but.....it reminds me of stink of my dogs anal gland squeezes the vet used to do. That is not a good thing.

69elan+2

14,199 posts

244 months

Tuesday 29th July 2008
quotequote all
Always used Danish on mine too... just because thats what the carpenter that produced it told me.

Was also going to say I don't actually mind the smell but after reading Tony's post above...... boxedin

allegro

1,344 posts

235 months

Tuesday 29th July 2008
quotequote all
danish oil is the way to go it dries alot quicker but will leave a glossy/satin finish which will get glossier with each application.
also sounds to me you are oiling it too often. if you are not careful it will end up sticky and never dry, especialy with linseed oil.once every other month, and just a light wipe is more than enough. has the underneath been oiled at all? it can easily bow and leave a raised hump as the bottom will dry out faster than the top. ultimately though it all depends on the quality of top as to how stable it is. ps be very diligent about water spills around the sink as the wood will end up black and knackered

zcacogp

Original Poster:

11,239 posts

275 months

Wednesday 30th July 2008
quotequote all
Chaps,

Thanks for your comments. Looks like danish may be the way to go.

Can I apply it over the top of the existing finish (achieved with 5 or so layers of linseed), or will I need to sand off all the linseed-finish? (If I do have to sand it, it will be a big job and I may end up just sticking with linseed.)

Allegro - you sound like you know a fair bit about this. The bottoms of the worktops were treated with linseed (generously, unlike the tops) before fitting them, and we put some waterproof varnish on the underneath where the worktop goes over the washing machine and dishwasher. And around the sink cut-out too.

Interesting that you think we could be over-oiling them. We are following the instructions (honest, guv'!) Maybe they encourage over-oiling?


Oli.

JRM

2,065 posts

263 months

Wednesday 30th July 2008
quotequote all
I sanded down our worktops and have been piling on the Danish Oil, it just keeps absorbing it, so I either I've badly neglected them in the past (well actually I have), or I'm just nowhere near over-oiling yet.

I guess if it still isn't dry after a week it's full of oil!!!