Diesel Particulate Filter Removal..... extra power....
Discussion
Diesel Particulate Filter Removal..... extra power....
Looking to remove the DPF off the 159 alfa 2.4 – any ideas what you would need to do to fool the software to stop regeneration or at least fool the ecu to remove the fault light?
Loads of stuff for gm products in the usa but cant find anything in the uk
Looking to remove the DPF off the 159 alfa 2.4 – any ideas what you would need to do to fool the software to stop regeneration or at least fool the ecu to remove the fault light?
Loads of stuff for gm products in the usa but cant find anything in the uk
The sensor will provide a voltage back to the ECU that will tell it how well the filter is working. It shouldn't be impossible to tap into that to measure it. Remove the filter and fit a resistor to the relevant wiring to replicate that return voltage?
That's just an educated guess, by the way.
As a bonus your particulate filter will be worth a bit at your local scrap metal dealer! Also, it WILL give you trouble- and most likely sooner rather than later. Those particulate filters are hateful things.
That's just an educated guess, by the way.
As a bonus your particulate filter will be worth a bit at your local scrap metal dealer! Also, it WILL give you trouble- and most likely sooner rather than later. Those particulate filters are hateful things.
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff