Wheel Centre Caps

[SteveOS3]

Spotted on ebay:

http://cgi.ebay.co.uk/TVR-Alloy-Wheel-Center-Centr...

Mine are in really poor condition but I don't know if it would be possible to remove the old cap from the centre and add the ones here?

Any comments?

SteveO

[ketvrin]

The plastic centres are flat behind the domed alloy nameplate you see so these would stick to the plastic centre OK I would think. The originals are held captive by the rim of the plastic centres, providing you dont damage that when you remove the old ones and the diameter of the new ones will fit OK then I think they will look fine

good luck

K

[SteveOS3]

Cheers K,

just have to measure the centres when I get home as I can't remember if they are 50 or 60mm

SteveO

[foxy600]

I changed mine when I had the wheels refurbished. I bought 4 from TVR Power (I think, it was 3 years ago!) they were about £25.
If you have never taken them out before you push them from the front of the wheel, I had the wheels off at the time which made it easier.