whats required to be an electrician?
Discussion
Hi,
I need to know what are the requirements to work as an electricain.
Before anyone says you cant be an electricial by doing a 4 day cource (I know that)
I have a strong electrical background. I now refuse to do electrical work at my current job becasue of insurance inplications unless its an emergency and need to make something safe.
I have spoken to a few training companies and I am getting differing advice. From what I can work out to get myself up-to-date I need the following
Full 17th edition wiring course (not the update from previous editions). Experience of electrical work seems enough to get onto this cource??????
Next, Inspection and testing.
Then Par P so I can sign my own work off
According to one muppet "Your employer can say I am compitent to do electrical work". I pointed out that I might work for myself and therfore would not have an employer. "Oh dont worry you can tell yourself your compitent in that case" Very worrying if thats true....
Any advice greatly appreciated.
Dave
I need to know what are the requirements to work as an electricain.
Before anyone says you cant be an electricial by doing a 4 day cource (I know that)
I have a strong electrical background. I now refuse to do electrical work at my current job becasue of insurance inplications unless its an emergency and need to make something safe.
I have spoken to a few training companies and I am getting differing advice. From what I can work out to get myself up-to-date I need the following
Full 17th edition wiring course (not the update from previous editions). Experience of electrical work seems enough to get onto this cource??????
Next, Inspection and testing.
Then Par P so I can sign my own work off
According to one muppet "Your employer can say I am compitent to do electrical work". I pointed out that I might work for myself and therfore would not have an employer. "Oh dont worry you can tell yourself your compitent in that case" Very worrying if thats true....
Any advice greatly appreciated.
Dave
Edited by David87M3 on Friday 1st August 10:04
If you need to do electrical work as part of your job you can do a competant person course in a couple of days I think.
It only covers you for the electrical knowledge you need in your job, so for instance a CORGI fitter could become a competant person in wiring a boiler without needing a sparks to sign off the work.
It only covers you for the electrical knowledge you need in your job, so for instance a CORGI fitter could become a competant person in wiring a boiler without needing a sparks to sign off the work.
there are two types of qualification available:
You can go for a 'domestic installer' who can work on anything domestic and sign it off (whole rewire, consumer unit change etc).
You will need 17th edition, C&G 2391 Inspection, testing and certification and Part P, and then sign up to one of the governing bodies (NICEIC, Elecsa, Nappit) and then scarily enough you can rewire a house.
To become a proper electrician (domestic, commerical, industrial) you will need to complete:
City & Guilds 2351
City & Guilds 2330 Electrotechnical, levels 2 and 3
City & Guilds 2391
Part P
City & Guilds 2381 17th Edition
and finally your Electrotechnical Services NVQ
edit: oh and your AM2
All the C&G courses and Part P can be completed either at college or at a training centre and the Electrotechnical Services NVQ is completed by you building up a portfolio of work and experience then submitting it to be approved.
Voila!
You can go for a 'domestic installer' who can work on anything domestic and sign it off (whole rewire, consumer unit change etc).
You will need 17th edition, C&G 2391 Inspection, testing and certification and Part P, and then sign up to one of the governing bodies (NICEIC, Elecsa, Nappit) and then scarily enough you can rewire a house.
To become a proper electrician (domestic, commerical, industrial) you will need to complete:
City & Guilds 2351
City & Guilds 2330 Electrotechnical, levels 2 and 3
City & Guilds 2391
Part P
City & Guilds 2381 17th Edition
and finally your Electrotechnical Services NVQ
edit: oh and your AM2
All the C&G courses and Part P can be completed either at college or at a training centre and the Electrotechnical Services NVQ is completed by you building up a portfolio of work and experience then submitting it to be approved.
Voila!
Edited by jamesgrrr on Friday 1st August 10:42
Morning
I'm a sparky who just happens to run his own firm, employs 20 odd and have 30yrs experience.
1. Go to see a employer and ask for a interview. I take anyone whom I consider has the right attitude and train them up to standard. You might check your spelling etc before writing to an employer.
2. Call into your local college and ask about training courses they can vary from 3 to 5 years depending upon experience and age to get formal qualifications. I have in the past taken on middle aged people and trained on site, then got them into short courses.
3. It is not sufficient just to go on a Part P course, you have to pass, join a trade organisation and then your works will be externally audited and visited periodically to confirm compliance with BS7671.
In short its all bl**dy paperwork nowadays.
I'm a sparky who just happens to run his own firm, employs 20 odd and have 30yrs experience.
1. Go to see a employer and ask for a interview. I take anyone whom I consider has the right attitude and train them up to standard. You might check your spelling etc before writing to an employer.
2. Call into your local college and ask about training courses they can vary from 3 to 5 years depending upon experience and age to get formal qualifications. I have in the past taken on middle aged people and trained on site, then got them into short courses.
3. It is not sufficient just to go on a Part P course, you have to pass, join a trade organisation and then your works will be externally audited and visited periodically to confirm compliance with BS7671.
In short its all bl**dy paperwork nowadays.
Klemheist said:
Morning
I'm a sparky who just happens to run his own firm, employs 20 odd and have 30yrs experience.
1. Go to see a employer and ask for a interview. I take anyone whom I consider has the right attitude and train them up to standard. You might check your spelling etc before writing to an employer.
2. Call into your local college and ask about training courses they can vary from 3 to 5 years depending upon experience and age to get formal qualifications. I have in the past taken on middle aged people and trained on site, then got them into short courses.
3. It is not sufficient just to go on a Part P course, you have to pass, join a trade organisation and then your works will be externally audited and visited periodically to confirm compliance with BS7671.
In short its all bl**dy paperwork nowadays.
I'm a sparky who just happens to run his own firm, employs 20 odd and have 30yrs experience.
1. Go to see a employer and ask for a interview. I take anyone whom I consider has the right attitude and train them up to standard. You might check your spelling etc before writing to an employer.
2. Call into your local college and ask about training courses they can vary from 3 to 5 years depending upon experience and age to get formal qualifications. I have in the past taken on middle aged people and trained on site, then got them into short courses.
3. It is not sufficient just to go on a Part P course, you have to pass, join a trade organisation and then your works will be externally audited and visited periodically to confirm compliance with BS7671.
In short its all bl**dy paperwork nowadays.

Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff



