Replacement Steering Wheel for a Tam

[Barry Ashcroft]

Can anybody recommend a replacement steering wheel.
Slightly smaller than standard but much thicker.
If anybody has driven a Z4M they will know the type of wheel I'm after.

[helipilot]

Barry,
I have put one of these on mine and it looks and feels great. Check out my picture on my classified ad.

http://www.k-tecracing.com/show_product.asp?id=214...

http://pistonheads.co.uk/sales/384358.htm


Mark

[Lensey]

Barry Ashcroft said:

Can anybody recommend a replacement steering wheel.
Slightly smaller than standard but much thicker.
If anybody has driven a Z4M they will know the type of wheel I'm after.

I know what your thinking, I like the one in my Mrs MSport, feels nice and thick. I was thinking about getting one of these

[PYNEY]

does this wheel have the control buttons for the lcd dash on the back of the wheel ?

[Barry Ashcroft]

I thought the buttons where mounted on a plate attached to the boss so the wheel swap is an easy thing to do.

[D14 AYS]

http://www.momoshop.co.uk/p1833007.htm

Fitted one of these to my Tuscan,nice bit of kit

[helipilot]

Yes you can keep the buttons as they are a separate plate. The wheel may need a few holes drilled in it to fit to the hub but they are hidden.

[Barry Ashcroft]

So was a boss kit required or did it line up with the boss already on the car when the personal was removed?

[Lensey]

D14 AYS said:

http://www.momoshop.co.uk/p1833007.htm

Fitted one of these to my Tuscan,nice bit of kit

I fitted one of these too, for a week and then took it off again, I thought it was a bit too big for me, I got a Boss from ebay to fit it.

With the OMP wheel you can keep the buttons on their plate behind it but I think I would add a couple of buttons to the wheel and have them on there.

[Barry Ashcroft]

The nice man from ANC just dropped this off



Just need the car to put it on

[DennisTheMenace]

Ha ! i was looking at that wheel for the mx5 , also like the momo v6 , but the MOMO across the top of the wheel ruins it.

[gary_de_tam]

Barry,

You fitting that to a Tamora ?
be interested to hear how it goes.

gt.

[Barry Ashcroft]

Yep will do it next weekend when I've collected the car will report back then

[peaktorque]

Barry Ashcroft said:

Yep will do it next weekend when I've collected the car will report back then

Great surname BTW

[Barry Ashcroft]

[Barry Ashcroft]

gary_de_tam said:

Barry,

You fitting that to a Tamora ?
be interested to hear how it goes.

gt.

All fitted took about 10mins.
You need one of these adapters and 6 M5x20 Tapered Screws

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...

[DennisTheMenace]

Looks good mate , oh and .....





Fitted on my nardi boss

[Barry Ashcroft]

Result