various electronic componemt location please.

[bubblebobble]

Hi again,
my t350 has had parts stolen so Iam asking for help with what is where etc.
In the passenger footwell, I only have the m99T2 alarm box and alot of multiplugs, so guys what else goes there?
In the drivers footwell I have the engine ecu only ( which was stolen and now replaced)and 2 ribbon cables, do these ribbon cables attach to the dash ecu?....if not were is the dash ecu located ....i could do with knowing as I am having one made the the car.
I have also purchased via the bay 2x door ecus that control the windows on spec and a meta M8 control module for the windows again on spec.
Thanks for all previous help, but Iam back off my hols and she is like an addiction, I need her running.
thankyou

[Targarama]

May be useful to have some photos of the bits and unused connectors that you do have. There will be one remaining connector un-used when you're done in the driver's footwell - up near the ECU. Its for the diagnostics connection.

[bubblebobble]

ok, i will get some pics donr tomorrow and post....thanks.
just out of interest does the dash ecu belong in the drivers footwell?

[rfisher]

2 words mate - dealer, insurance.

Job done.

Not sure we should be posting details of the control ecus and alarm/immobiliser gubbins and their location in our precious Tivs.

[bubblebobble]

yes I agree, but dealer and insurance dosnt quite work in this instance, I have aquired the t350 through an insurance loss and i wish to keep this vehicle.
I have met many really helpful people in this forum and have received some superb advice from ex tvr employees and enthuasists, surely the location of ecus isnt a big issue.
Details of ecu placement, engine managenemt etc of even the most luxiourous sports cars on the planet are pretty freely available. All iam asking is for advice on a car that isnt as documented as some of the others.....
but everyone is entilted to his/her opinion.

[NCE 61]

Ribbon cables go to the dash ECU

[bubblebobble]

HI thankyou for the picture.

I have uploaded 2 photos of my dilemma.

Footwell drivers side.

http://i508.photobucket.com/albums/s322/bu88le8o88...

C,D goto the dash ecu as my friend has posted.
Does B go to the dash ecu too?

"A" seems to have the multiplug that fits nicely to my door control modules I purchased?


Footwell Passenger side.

http://i508.photobucket.com/albums/s322/bu88le8o88...

"A" again seems correct to fit the multiplug for my door control ecu.

No idea with either C or B, but guessing something to do with the immobiliser?



opionions and thoughts please.

thankyou

[NCE 61]

'B' is also the dash ECU you can just see the four connectors on top of the dash ECU in my picture.

[VARLEYHYD]

Passenger footwell should have heater controller/amplifier to 6 way plug with 4 wires used



G