After Market Exhaust for 08 Blade
After Market Exhaust for 08 Blade
Author
Discussion

Atom

Original Poster:

482 posts

246 months

Saturday 23rd August 2008
quotequote all
Considering buying a new toy for my baby !
Any recommendations?
If I fit a new exhaust will I have to have the engine re-mapped?
I am unsure about the looks of the factory exhaust and it sounds a bit tame !!

GreigR

765 posts

237 months

Saturday 23rd August 2008
quotequote all
Go for the Akrapovic, I have them on my R1, the sound and quality are fantastic. I wouldn't have thought you need it re-mapping but I'm not 100% sure on that one.

scoobster999

581 posts

221 months

Saturday 23rd August 2008
quotequote all
I have an 08 blade too and on the lookout for an endpipe. I looked at Leo Vince pipe and it looks excellent albeit not much power gain top end, but healthy raise in mid range - I think the guy off Fast Bikes mag has one. I don't think they have developed a PC for it yet tho....

Brite spark

2,106 posts

232 months

Saturday 23rd August 2008
quotequote all
you mean re-jetted not re-mapped ? (altering the fuel mix -easily done with carbs but not sure about injection)

By changing the exhaust a carb may need re jetting to adjust for the changes that the exhaust makes to the running of the engine

wasn't it honda who said the new fireblade exhaust shouldn't be changed as it will loose power from it's optimum setting?

you could also look into a power commander if your looking for more performance, if its just exhaust note that you're after then I'd change the exhaust and see how it goes

Edited by Brite spark on Saturday 23 August 12:46

Muffles

516 posts

253 months

Saturday 23rd August 2008
quotequote all
Brite spark said:
you mean re-jetted not re-mapped ? (altering the fuel mix -easily done with carbs but not sure about injection)

By changing the exhaust a carb may need re jetting to adjust for the changes that the exhaust makes to the running of the engine

wasn't it honda who said the new fireblade exhaust shouldn't be changed as it will loose power from it's optimum setting?

you could also look into a power commander if your looking for more performance, if its just exhaust note that you're after then I'd change the exhaust and see how it goes

Edited by Brite spark on Saturday 23 August 12:46
I thought 'rejetting' was a carb only term as the jet is part of/related to the carb? Injection engines not having carbs and you alter the fuelling by remapping to deliver more/less fuel at various points, etc. Not really up on this but that's what I gathered.

Stu R

21,701 posts

246 months

Saturday 23rd August 2008
quotequote all
Muffles said:
Brite spark said:
you mean re-jetted not re-mapped ? (altering the fuel mix -easily done with carbs but not sure about injection)

By changing the exhaust a carb may need re jetting to adjust for the changes that the exhaust makes to the running of the engine

wasn't it honda who said the new fireblade exhaust shouldn't be changed as it will loose power from it's optimum setting?

you could also look into a power commander if your looking for more performance, if its just exhaust note that you're after then I'd change the exhaust and see how it goes

Edited by Brite spark on Saturday 23 August 12:46
I thought 'rejetting' was a carb only term as the jet is part of/related to the carb? Injection engines not having carbs and you alter the fuelling by remapping to deliver more/less fuel at various points, etc. Not really up on this but that's what I gathered.
Correctamundo. Carb bikes have jets, injection bikes have injectors. Which leaves you one of three main options;

1) do nothing and just fit the exhaust

2) buy a replacement ECU (sometimes supplied with the exhaust) thats got a generic map on it for that bike with that exhaust, no idea whether it's been done or even possible for the 08 blade.

3) go down the power commander / mapping route which is more expensive but gets you the best results generally as the fuelling on the bike can be altered exactly when and where in the rev range it needs to be.

Doing nothing really isn't advisable, the fuelling has been optimised for that exhaust setup at the factory, so changing the exhaust without the fuelling basically means if you're lucky it won't run any better, if you're unlucky it'll run like crap, which is more likely.

basically budget for a power commander and get the most out of the exhaust for a few quid more

castrolcraig

18,073 posts

237 months

Saturday 23rd August 2008
quotequote all
not really recomended as it invalidates your warranty, but akrapovic system and power commander is the way forward.

randlemarcus

13,646 posts

262 months

Sunday 24th August 2008
quotequote all
^^^ With him on the exhaust.

If you want something to immeasurably improve it, get a decent looking aftermarket plate hanger and make the design look like the chap with the crayons actually intended it to lokk like, rather than the rule writers in Brussels biggrin

milf hunter

95 posts

227 months

Sunday 24th August 2008
quotequote all
got a scorpion can on mine and Pc111 power commander as the fuel mix on a standard 08 is set to run rich. pc111 fitted by dynojet and mapped to perfection you must also fit the o2 sensor for correct fuelling
giv martin a ring at dynojet they got discounton at the moment £200 fitted and mapped on rolling road all in you have to go to preston but its worth it
http://www.dynojet.co.uk/



Edited by milf hunter on Sunday 24th August 09:02

milf hunter

95 posts

227 months

Sunday 24th August 2008
quotequote all
randlemarcus said:
^^^ With him on the exhaust.

If you want something to immeasurably improve it, get a decent looking aftermarket plate hanger and make the design look like the chap with the crayons actually intended it to lokk like, rather than the rule writers in Brussels biggrin
R+G tail tidy job done

Atom

Original Poster:

482 posts

246 months

Sunday 24th August 2008
quotequote all
Milf !

I have done the R&G Tail tidy and the crash bungs. Where did you get the Scorpion can from and how much did it cost?

Atom

Original Poster:

482 posts

246 months

Sunday 24th August 2008
quotequote all
Forgot to ask... How does it sound? Is it a vast improvement on the factory unit?

podman

9,086 posts

271 months

Sunday 24th August 2008
quotequote all
[quote=milf hunter]
giv martin a ring at dynojet they got discounton at the moment £200 fitted and mapped on rolling road all in you have to go to preston but its worth it
http://www.dynojet.co.uk/
quote]

That is a bloody bargain....what was your end result mate after the mapping?

milf hunter

95 posts

227 months

Monday 25th August 2008
quotequote all
Atom said:
Milf !

I have done the R&G Tail tidy and the crash bungs. Where did you get the Scorpion can from and how much did it cost?
from local dealer £420

milf hunter

95 posts

227 months

Monday 25th August 2008
quotequote all
Atom said:
Forgot to ask... How does it sound? Is it a vast improvement on the factory unit?
the sound is awesome and much better since power commander fitted

clicky[URL=http://s144.photobucket.com/albums/r174/mgyg159/08%20blade/?action=view&current=MOV00327.flv][/URL]

milf hunter

95 posts

227 months

Monday 25th August 2008
quotequote all

giv martin a ring at dynojet they got discounton at the moment £200 fitted and mapped on rolling road all in you have to go to preston but its worth it
http://www.dynojet.co.uk/
quote]

That is a bloody bargain....what was your end result mate after the mapping?
[/quote]

168.4bhp


i was expecting more but since i have ridden its plenty of power for me biggrin

Edited by milf hunter on Tuesday 16th September 18:38

Atom

Original Poster:

482 posts

246 months

Tuesday 16th September 2008
quotequote all
Just had a Yoshi steel and carbon slip on fitted by Demon Tweeks then took Milf's advice and went to Dynojet for a Power Commander and dyno tune.

The new can sounds awesome and looks great. The Dynojet boys managed to get 170 bhp out of the old girl, so she sounds like a race bike and goes like one too ! Very Happy !!!