Best thing to use?
Author
Discussion

mitzy

Original Poster:

13,858 posts

228 months

Thursday 28th August 2008
quotequote all
Hi

Not sure if I'm going to get this right or not.

The plate when the handlebars sit, where the ignition is has lost some of the black coating on it.

What can I use to cover it? Was looking at the carbon fibre paper stuff (again not sure what its called)

Does anyone know of any products out there which would fit the bill. Just want to start making her look tidy.

StevRS

443 posts

240 months

Thursday 28th August 2008
quotequote all
And if anybody can suggest something similar for black forks where the paint's come away leaving silvery/white bits (looks like when stickers have been pulled off wood or something leaving white sticky stuff), then I'd be most appreciative! I thought Something like Smoothrite might do it... biggrin

Sossige

3,176 posts

294 months

Thursday 28th August 2008
quotequote all
Steve - look for a product called POR-15 - you should be able to get it online from a company called "Frosts" that sell car restoration products. It's similar to Hammerite and the like, except it is much more resistant to chipping.

For goodness sake though, wear gloves when you paint it on. If you get some on your skin, you will never get it off.

S

StevRS

443 posts

240 months

Thursday 28th August 2008
quotequote all
Sossige said:
Steve - look for a product called POR-15 - you should be able to get it online from a company called "Frosts" that sell car restoration products. It's similar to Hammerite and the like, except it is much more resistant to chipping.

For goodness sake though, wear gloves when you paint it on. If you get some on your skin, you will never get it off.

S
Great stuff, thanks! biggrin

Sorry Mitzie, won't hijack the thread any more! wink

mitzy

Original Poster:

13,858 posts

228 months

Thursday 28th August 2008
quotequote all
StevRS said:
Sossige said:
Steve - look for a product called POR-15 - you should be able to get it online from a company called "Frosts" that sell car restoration products. It's similar to Hammerite and the like, except it is much more resistant to chipping.

For goodness sake though, wear gloves when you paint it on. If you get some on your skin, you will never get it off.

S
Great stuff, thanks! biggrin

Sorry Mitzie, won't hijack the thread any more! wink
No, thats fine I have some silver on my forks which may need the same stuff too. Will check it out.

Getting his drill out tonight to put holes in me new number plate too. Women with power tools!!

Knowledge transfer on PH BB.

StevRS

443 posts

240 months

Thursday 28th August 2008
quotequote all
mitzy said:
Getting his drill out tonight to put holes in me new number plate too.
He'll be please to hear that I bet rolleyes



rofl

roboxm3

2,486 posts

226 months

Thursday 28th August 2008
quotequote all
Mitzy if you're just looking for something to cover the top yoke / clamp then ebay will probably be your best bet.

No doubt you'll find a carbon-effec sticker for the VFR which should tidy it up a bit.

Alternatively you could buy a sheet of the carbon-effect sticker and make your own but it's usually a right pain in the arse to be honest.

dern

14,055 posts

310 months

Thursday 28th August 2008
quotequote all
Sossige said:
Steve - look for a product called POR-15 - you should be able to get it online from a company called "Frosts" that sell car restoration products. It's similar to Hammerite and the like, except it is much more resistant to chipping.

For goodness sake though, wear gloves when you paint it on. If you get some on your skin, you will never get it off.
That stuff is great but essentially chassis paint - would it look it on fork legs? I'd mask everything off, clean up the loose paint and (using some primer if needed) simply put some satin black from a rattle can on.

StevRS

443 posts

240 months

Thursday 28th August 2008
quotequote all
I had planned to use Smoothrite, so you can probably tell that looks aren't massively high on my agenda - just want it to look a bit less scruffy really! A colleague said yesterday 'That's the shabbiest bike I've ever seen in this car park' - he was right rofl

Spray paint would give a better finish than brushing it on though... smile

Sossige

3,176 posts

294 months

Thursday 28th August 2008
quotequote all
dern said:
That stuff is great but essentially chassis paint - would it look it on fork legs? I'd mask everything off, clean up the loose paint and (using some primer if needed) simply put some satin black from a rattle can on.
I've used it on wishbones and a rollcage before - looked fine, just don't put it on too thickly. I guess trying on an old fork first would be the best plan, to see if you are happy with the appearance.

S

Edited by Sossige on Thursday 28th August 11:52

StevRS

443 posts

240 months

Thursday 28th August 2008
quotequote all
I'll try it out first on an old fork - one of the old forks on the front of the bike wink

Muffles

516 posts

253 months

Thursday 28th August 2008
quotequote all
Do you have any other keys on your bike's key? I keep mine with my alarm fob on my neck for this reason smile might help in future?

Rich_AR

1,998 posts

235 months

Thursday 28th August 2008
quotequote all

Chilli

17,320 posts

267 months

Thursday 28th August 2008
quotequote all
mitzy said:
Hi

Not sure if I'm going to get this right or not.

The plate when the handlebars sit, where the ignition is has lost some of the black coating on it.

What can I use to cover it? Was looking at the carbon fibre paper stuff (again not sure what its called)

Does anyone know of any products out there which would fit the bill. Just want to start making her look tidy.
Trumpet, shirley?

mitzy

Original Poster:

13,858 posts

228 months

Thursday 28th August 2008
quotequote all
Rich_AR said:
ahhhhhh thanks babe, ebay here I come!

x

Edited by mitzy on Thursday 28th August 13:31

mitzy

Original Poster:

13,858 posts

228 months

Thursday 28th August 2008
quotequote all
Chilli said:
mitzy said:
Hi

Not sure if I'm going to get this right or not.

The plate when the handlebars sit, where the ignition is has lost some of the black coating on it.

What can I use to cover it? Was looking at the carbon fibre paper stuff (again not sure what its called)

Does anyone know of any products out there which would fit the bill. Just want to start making her look tidy.
Trumpet, shirley?
Lol , at the weekend his name is MANDY.

Chilli

17,320 posts

267 months

Thursday 28th August 2008
quotequote all
mitzy said:
Chilli said:
mitzy said:
Hi

Not sure if I'm going to get this right or not.

The plate when the handlebars sit, where the ignition is has lost some of the black coating on it.

What can I use to cover it? Was looking at the carbon fibre paper stuff (again not sure what its called)

Does anyone know of any products out there which would fit the bill. Just want to start making her look tidy.
Trumpet, shirley?
Lol , at the weekend his name is MANDY.
Now THAT I would pay to see......The pics for comedy value you understand, nothing else.

trumpet600

3,527 posts

262 months

Thursday 28th August 2008
quotequote all
we've all got skeletons in our wardrobe. what's yours?

mitzy

Original Poster:

13,858 posts

228 months

Thursday 28th August 2008
quotequote all
Chilli said:
mitzy said:
Chilli said:
mitzy said:
Hi

Not sure if I'm going to get this right or not.

The plate when the handlebars sit, where the ignition is has lost some of the black coating on it.

What can I use to cover it? Was looking at the carbon fibre paper stuff (again not sure what its called)

Does anyone know of any products out there which would fit the bill. Just want to start making her look tidy.
Trumpet, shirley?
Lol , at the weekend his name is MANDY.
Now THAT I would pay to see......The pics for comedy value you understand, nothing else.
I had better stop, may come home to find my babies out of the garage in the wetfrown

trumpet600

3,527 posts

262 months

Thursday 28th August 2008
quotequote all
mitzy said:
I had better stop, may come home to find my babies out of the garage in the wetfrown
or even me wearing your clothes.

Now you know what i do with my days off. smile