GSXR Exhaust
Author
Discussion

lawrence567

Original Poster:

7,507 posts

221 months

Thursday 28th August 2008
quotequote all
Right guys,

Not sure if anyone has any knowledge of whats the right thing to do but i've posted this on another forum an nobody replied!
I've just had a Yoshi end can fitted as i couldnt afford a full system, however the cat box is making the bike awfully quiet.
I want to have a ncier exhaust not but i can only think of 3 ways to do it:

1. Getting a completely new system - which i cant afford to do right now!
2. Get some headers for it (K8 600) although i dont have a clue where from or how much / Will the K7 headers fit?
3. Get a mid pipe made up to go between where the Catbox would be so that means eliminating the cat box altogether.

I asked the mechanic who did the work, he won't tell me a definate answer & i've phoned up exhaust people they say a mid pipe would work but consult your mechanic - in a bit of a fix!
Anybody offer any decent advise?

Which above is feesable pro's / con's etc?



Rawwr

22,722 posts

265 months

Thursday 28th August 2008
quotequote all
Should've got an MTC wink

I can't see any reason why a link pipe wouldn't work but you may be getting to the point where a remap might be a good idea.

lawrence567

Original Poster:

7,507 posts

221 months

Thursday 28th August 2008
quotequote all
Lol i was looking at an MTC but i still would of needed the Catbox removing.
I see no reason why a mid connector pipe wouldnt work - except for the fact its adding more links.
When you say a re-map are we talking PC or just with a yoshi box?

Muffles

516 posts

253 months

Thursday 28th August 2008
quotequote all
Decat pipe works, I believe. Don't know about the remap aspect, though.

Other options? Do you like stubby exhausts? You might be able to get more noise by stubbying your exhaust, can't really guarantee how much louder it will (or won't) become though.

I would be going with the mid pipe, just remember it's fairly irreversible... (you could get a small reconnection sleeve made up, *if* there is room between cat & headers to fit it).

Edited by Muffles on Thursday 28th August 16:46

Chilli

17,320 posts

267 months

Thursday 28th August 2008
quotequote all
Stab a few holes in the pipes?

Muffles

516 posts

253 months

Thursday 28th August 2008
quotequote all
Btw not sure what your option 2 was - new K8 headers? They'll be the same as your existing ones, so will have the same prob? And unfortunately I'd expect K7 headers not to fit your end can...unless you got a pipe made up, so basically 2 & 3 combined would give you a "reversible" solution at slightly more expense (how much are standard K7 headers? Or even aftermarket on Ebay?).

lawrence567

Original Poster:

7,507 posts

221 months

Thursday 28th August 2008
quotequote all
I can get a mid pipe fabricated and i've asked another biker/bike mechanic and he said a mid pipes feesbale but a PC will HAVE to be used as it's going to mess with the emmissions a lot, so i need to save for a PC now!

Muffles

516 posts

253 months

Thursday 28th August 2008
quotequote all
I'm not so certain it'll mess it up too much to be honest. The K7 slip-ons remove the cat and they don't "require" a PCIII/remap.

You can do it to be on the safe side, also you don't have to have a PCIII to remap your bike, you can remap the ECU itself. It doesn't have as much adjustability but will certainly make sure it's not going to blow itself up...

Rawwr

22,722 posts

265 months

Thursday 28th August 2008
quotequote all
lawrence567 said:
Lol i was looking at an MTC but i still would of needed the Catbox removing.
Yeah, the MTC replaces the cat.