Falling apart
Author
Discussion

Rach*

Original Poster:

8,824 posts

247 months

Monday 1st September 2008
quotequote all
Me and the bike! I feel rubbish today, think I'm a bit tired...

Anyway, there seems to be an oil leak from somewhere, oily deposits on the exhaust, small leakage in 1 place on the head. Not sure how much is alot of oil use on a bike but I've gotten through 3/4l in about 2 months.

Where you put the oil in doesnt seem to have a very good seal and a small amount is leaking from there too.

I don't want to spend aload of money on him now I'm going to Oz next year, should I just strip off the fairings, give him a good clean and degreasing and hope for the best?

Busamav

2,954 posts

239 months

Monday 1st September 2008
quotequote all
what bike is it ?

Are you sure you havent overfilled it ?


dern

14,055 posts

310 months

Monday 1st September 2008
quotequote all
The oil filler should have an o-ring in it if it's like the ones I've seen - maybe it's missing or has perished. Replacing that should do the trick.

Cleaning the engine up will help you identify where the other leak is coming from. Maybe you'll get lucky and it's just the rocker cover. This is a relatively easy fix... new gasket and tighten down to the correct torque and you're done.

Good luck.

Mark

randlemarcus

13,646 posts

262 months

Monday 1st September 2008
quotequote all
Its not tiredness, hun, its the Red Wine of Doom...

Stripping, degreasing and cleaning should give you a damn good idea whereabouts the oil is actually leaking from, and endear you to whoever fixes it after that, so no harm in doing it...

Rach*

Original Poster:

8,824 posts

247 months

Monday 1st September 2008
quotequote all
CBR 600 FV, not overfilled for sure, after riding to Knockhill and back, about 300 miles, it was nearly empty!

Rach*

Original Poster:

8,824 posts

247 months

Monday 1st September 2008
quotequote all
randlemarcus said:
Its not tiredness, hun, its the Red Wine of Doom...

Stripping, degreasing and cleaning should give you a damn good idea whereabouts the oil is actually leaking from, and endear you to whoever fixes it after that, so no harm in doing it...
hehe Must be getting old if its a 4 day hangover from Thursday!

Most of the club mechanic-y people are away at the weekend, so I'll give him a clean for them getting back and coming to help.

WD40 for de-greasing?

dern

14,055 posts

310 months

Monday 1st September 2008
quotequote all
Rach* said:
WD40 for de-greasing?
Engine degreaser... you can get it in big tins and it'll be a lot cheaper than wd40 I would have though.

mitzy

13,858 posts

228 months

Monday 1st September 2008
quotequote all
dern said:
Rach* said:
WD40 for de-greasing?
Engine degreaser... you can get it in big tins and it'll be a lot cheaper than wd40 I would have though.
Rach, its called GUNK, great stuff, used it on my wheels.

sjtscott

4,215 posts

262 months

Monday 1st September 2008
quotequote all
dern said:
Rach* said:
WD40 for de-greasing?
Engine degreaser... you can get it in big tins and it'll be a lot cheaper than wd40 I would have though.
Gunk is the stuff you need, used it loads when I was bothered about regular bike washing/cleaning. Spray on, leave for a bit then wash off.

dern

14,055 posts

310 months

Monday 1st September 2008
quotequote all
mitzy said:
dern said:
Rach* said:
WD40 for de-greasing?
Engine degreaser... you can get it in big tins and it'll be a lot cheaper than wd40 I would have though.
Rach, its called GUNK, great stuff, used it on my wheels.
Yes, sorry... gunk.

Rach*

Original Poster:

8,824 posts

247 months

Monday 1st September 2008
quotequote all
Brill, thanks everyone!

Wonder if I should put my bike cover in the communal washing machine? scratchchin

scoobster999

581 posts

221 months

Monday 1st September 2008
quotequote all
Rach* said:
Brill, thanks everyone!

Wonder if I should put my bike cover in the communal washing machine? scratchchin
Dont get gunk on the tyres if you can avoid it, it is a solvent and probably not too good with rubber - and a bit slippy if I remember. Smells nice and melts tarmac!!

Rach*

Original Poster:

8,824 posts

247 months

Monday 1st September 2008
quotequote all
My little area outside the barracks is paved so that should be OK. I'll be careful of my tyres and just do one side at a time incase I forget how to put him back together again smile

smack

9,777 posts

222 months

Monday 1st September 2008
quotequote all
Rach* said:
Brill, thanks everyone!

Wonder if I should put my bike cover in the communal washing machine? scratchchin
I would biggrin

Your in the RAF right? I am sure the guys put in some rally grotty stuff in them - Mountain Biking kit in winter is one of the top of my head...

2OOM

374 posts

315 months

Monday 1st September 2008
quotequote all
Rach* said:
My little area outside the barracks is paved so that should be OK. I'll be careful of my tyres and just do one side at a time incase I forget how to put him back together again smile
I've also heard you shouldn't get it on your chain either if it's an O ring chain, if it damages the O rings the chain will wear faster....I don't know if it's true and I've never tried to find out.I just make sure I use a gentle solvent on the chain.


Rach*

Original Poster:

8,824 posts

247 months

Monday 1st September 2008
quotequote all
Just reminded me, chain needs tightening but I didnt have a spanner big enough!

steven182

1,886 posts

232 months

Monday 1st September 2008
quotequote all
Rach* said:
Just reminded me, chain needs tightening but I didnt have a spanner big enough!
fashion one from wood and string, or buy one. i prefer the wood and string idea more ray mears

Rach*

Original Poster:

8,824 posts

247 months

Monday 1st September 2008
quotequote all
Wood and string will be good practise for the Oz rally biggrin

Momentofmadness

2,371 posts

272 months

Monday 1st September 2008
quotequote all
dern said:
mitzy said:
dern said:
Rach* said:
WD40 for de-greasing?
Engine degreaser... you can get it in big tins and it'll be a lot cheaper than wd40 I would have though.
Rach, its called GUNK, great stuff, used it on my wheels.
Yes, sorry... gunk.
Paraffin FTW smile

Hooli

32,278 posts

231 months

Monday 1st September 2008
quotequote all
i popped to halfrauds yesterday for gunk & they didnt have any. i got some pink goo made by swarfega instead, its bloody amazing stuff. work it in with a paintbrush & it makes gunk look as useless as washing up liquid. you need sod all so it'll last ages too.
oh & its biodegradable so no problem with washing it off on the floor if your a hippy.

that amount of oil use sounds rather excessive to me, your lucky its not coating the back tyre for you if its all pouring out the sides!