Jardine GP1 Exhaust?
Author
Discussion

f13ldy

Original Poster:

1,432 posts

232 months

Monday 1st September 2008
quotequote all
Ok if I order a Jardine is this my worst case scenario?

It is offensively loud, my neighbours will hound me like Gary Glitter and I'll be pulled by the plod everytime I leave my drive.

Or seeing as I'll still have my CAT/SET thingymawotsit (K8 600) and the silencer baffle that is also supplied, it will be a bit noisier but not ear shatteringly loud, I'll be able to attend track days (just or maybe not) and just be another biker with a reasonably loud exhaust?

I need to get rid of the growth that is the standard exhaust? Will it also need setting up by a professional?

J5MBF

260 posts

231 months

Monday 1st September 2008
quotequote all
I've just had a quick look on Youtube at some vids of the exhaust. Seems preety loud. Have a look and see what you think

f13ldy

Original Poster:

1,432 posts

232 months

Monday 1st September 2008
quotequote all
Aye I've been researching them, some sound stupidly loud, but one with the baffle doesn't seem as bad...

http://www.youtube.com/watch?v=ckvcsNW-sQE

Check those baffles moving. Nice!

RemaL

25,103 posts

265 months

Monday 1st September 2008
quotequote all
i've got Triumph race cans on my Speed triple. measured at 119db at 9k. but only sounds loud if you give it some. So I say get then and give it a try

f13ldy

Original Poster:

1,432 posts

232 months

Monday 1st September 2008
quotequote all
119db...

I'm far from an expert on sound, but that strikes me as being rather loud!

Busamav

2,954 posts

239 months

Tuesday 2nd September 2008
quotequote all
119 will get you kicked out of just about every circuit / airfield i suspect

sprinter885

11,550 posts

258 months

Tuesday 2nd September 2008
quotequote all
f13ldy said:
Aye I've been researching them, some sound stupidly loud, but one with the baffle doesn't seem as bad...

http://www.youtube.com/watch?v=ckvcsNW-sQE

Check those baffles moving. Nice!
Reminds me of seeing our old neighbour's Alsation dog when on heat-now THAT wasn't "Nice" !

lawrence567

7,507 posts

221 months

Tuesday 2nd September 2008
quotequote all
f13ldy said:
Ok if I order a Jardine is this my worst case scenario?

It is offensively loud, my neighbours will hound me like Gary Glitter and I'll be pulled by the plod everytime I leave my drive.

Or seeing as I'll still have my CAT/SET thingymawotsit (K8 600) and the silencer baffle that is also supplied, it will be a bit noisier but not ear shatteringly loud, I'll be able to attend track days (just or maybe not) and just be another biker with a reasonably loud exhaust?

I need to get rid of the growth that is the standard exhaust? Will it also need setting up by a professional?
I've got a K8 600 - just bought a Yoshi straight through end can.
With the cat box on it isnt any louder, sounds slightly different but it isnt any louder.
Only way to get it loud is to either have a full system and a PC III or a back box with a mid link and PC III.
I've been advised by mechanic mates & fellow GSXR owners on a few forums that the back box with the mid link pipe will be completly fine but it messes up all the fuelling of the bike and a PC III is essential to get it to run properly.
Reason for the mid link?
You cut out the cat box then link from remaining pipe on headers to backbox!

fergus

6,430 posts

306 months

Tuesday 2nd September 2008
quotequote all
f13ldy said:
119db...

I'm far from an expert on sound, but that strikes me as being rather loud!
119dB will most likely get you a construction and use type ticket from plod as well. That is VERY loud. Moto GP are only around 120dB........

Muffles

516 posts

253 months

Tuesday 2nd September 2008
quotequote all
lawrence567 said:
I've got a K8 600 - just bought a Yoshi straight through end can.
With the cat box on it isnt any louder, sounds slightly different but it isnt any louder.
Only way to get it loud is to either have a full system and a PC III or a back box with a mid link and PC III.
I've been advised by mechanic mates & fellow GSXR owners on a few forums that the back box with the mid link pipe will be completly fine but it messes up all the fuelling of the bike and a PC III is essential to get it to run properly.
Reason for the mid link?
You cut out the cat box then link from remaining pipe on headers to backbox!
Ahem...I'm sure you saw my post on your other thread but you already have a 'built-in' PCIII, albeit a simpler version...you don't "need" a PCIII but people don't know/forget that the standard ECU is reprogrammable and enough if you just want to make sure it's in the right ballpark!

lawrence567

7,507 posts

221 months

Tuesday 2nd September 2008
quotequote all
Muffles said:
lawrence567 said:
I've got a K8 600 - just bought a Yoshi straight through end can.
With the cat box on it isnt any louder, sounds slightly different but it isnt any louder.
Only way to get it loud is to either have a full system and a PC III or a back box with a mid link and PC III.
I've been advised by mechanic mates & fellow GSXR owners on a few forums that the back box with the mid link pipe will be completly fine but it messes up all the fuelling of the bike and a PC III is essential to get it to run properly.
Reason for the mid link?
You cut out the cat box then link from remaining pipe on headers to backbox!
Ahem...I'm sure you saw my post on your other thread but you already have a 'built-in' PCIII, albeit a simpler version...you don't "need" a PCIII but people don't know/forget that the standard ECU is reprogrammable and enough if you just want to make sure it's in the right ballpark!
Sorry no i didnt actually!
So how the heck do you go about re-programming it then?
with a Yoshi box?

Busamav

2,954 posts

239 months

Tuesday 2nd September 2008
quotequote all
going into the original ecu is dangerous territory for anybody but the very experienced with the particular unit .


lawrence567

7,507 posts

221 months

Tuesday 2nd September 2008
quotequote all
Yeah i'm not going to go doing it myself, i was just heavily advised i'd need a PCIII.
Its not like they're getting any business out of it as i wouldnt be buying it from them or getting them to set it up!

f13ldy

Original Poster:

1,432 posts

232 months

Tuesday 2nd September 2008
quotequote all
Lawrence do you need a PCIII or have the ecu set up if you are just getting a Yoshi slip on?

I'm starting to lean towards the R55 again.

lawrence567

7,507 posts

221 months

Tuesday 2nd September 2008
quotequote all
I have no idea i'm all confused now, i'm getting a mid link to eliminate the cat box, and i was told by a couple of people i'd need a PC III but muffles says different, to be honest, its unknown territory for so i have no idea!