BMW if you can hear me......
BMW if you can hear me......
Author
Discussion

xspencex

Original Poster:

1,534 posts

267 months

Saturday 6th September 2008
quotequote all
...please make this bike!!!



however I fear this is just another clever photoshop job.


dibblecorse

7,666 posts

223 months

Saturday 6th September 2008
quotequote all
why ???? and i hope its a photoshop effort ....

Chilli

17,320 posts

267 months

Saturday 6th September 2008
quotequote all
I agree, it's a good looking bike. It'll either be very dirrerent or about 20 million notes.

cyberface

12,214 posts

288 months

Saturday 6th September 2008
quotequote all
Has anyone else made a single-front-fork motorbike??

I know Cannondale do a mountain bike with one fork leg only, but that's also known to be unreliable as well (IIRC)....

Nice and easy to replace tyres / brakes, but I'd be expecting the wheel to fall off !!!! biggrin

Hooli

32,278 posts

231 months

Saturday 6th September 2008
quotequote all
cyberface said:
Has anyone else made a single-front-fork motorbike??
dont bmw use a telilever thingy that sorta looks like the rear end not forks? i think i can see a suspension arm horizontal behind the wheel.

G Man

4,053 posts

291 months

Saturday 6th September 2008
quotequote all
There are some spy shots of a BMW with a single sided front suspension being tested around a track, so it seems the bike might be real



Edited by G Man on Saturday 6th September 20:53

RizzoTheRat

29,148 posts

223 months

Saturday 6th September 2008
quotequote all
Yamaha did a single sided front swingarm some years back with the GTS1000



Edited by RizzoTheRat on Saturday 6th September 20:51

cyberface

12,214 posts

288 months

Saturday 6th September 2008
quotequote all
thumbup

The PH hive mind knows everything!!! Brilliant responses - I was really curious as to whether a single-sided front wheel was a sensible (or even feasible) engineering solution. I'm not formally trained as an engineer but am extremely analytical by nature and this intrigued me.

Good spot about it not being a single front fork (like the Cannondale pushbike 'lefty' one-sided fork) - it's clearly a swingarm.

Which is common at the rear of bikes these days. But the rear wheel doesn't steer. Anyone know how a swingarm layout at the front can allow the front wheel to swivel vertically without the angle of turn being influenced (heavily, due to the short length of the swingarm) by the angle of the front suspension?

Badly worded, but as the suspension swings up and down (compression if it were a fork design), a simple pivot attached to the end of the swingarm would change the axis of rotation for steering. I'm thinking of car steering here, where the kingpin needs to be kept vertical or at least independent of changes of suspension angle.

It doesn't appear that there are two swingarms (allowing a vertical kingpin, like double wishbone suspension on a car)... but even that would then be influenced by the pitch of the bike in the longitudinal direction, which changes more drastically on acceleration / deceleration with bikes...

It's a bit of a tricky engineering question for a Saturday night but my GF's ill, I'm knackered and it's takeaway pizza, a load of cans of cider and the internet for me frown

G Man

4,053 posts

291 months

Saturday 6th September 2008
quotequote all
There were rumours BMW was going to do a triple 675 like triumph this might be it

RizzoTheRat

29,148 posts

223 months

Saturday 6th September 2008
quotequote all
Agree it's a tricky bit of enginering. The BMW Paralever gets around it by having the swing arm above the wheel, but that S6 looks to have something more like the GTS which had a joint in the hub, the problem with that though is you get a fairly limited steering lock.

On a car as the wheel turns it moves forwards or backwards, as well as in slightly, because the pivot in inboard of the wheel, if a bike used a similar system it would make the handling a nightmare

Edited by RizzoTheRat on Saturday 6th September 22:50

odyssey2200

18,650 posts

240 months

Saturday 6th September 2008
quotequote all
IIRC didn't BMW buy Husqvana recently?

Perhaps they would beand it as a Husky.