mitubishi evo 6 4g63 , torque settings help!!!!!!!!!!!!!!!!!

[cambscruise]

i have an evo 6 and need the torque settings for camshafts and the head bolts?

please help someone and also the timing settings.

its the 4g63t-m6934 engine , 2.0 16v

[LaurenceFrost]

Valve timing:
Intake opens 21deg BTDC, closes 59deg ATDC
Exhaust opens 58deg BTDC, closes 18deg ATDC

Camshaft bolt: 118nm
Camshaft bearing cap: 20nm
Cylinder head bolt [Tighten to 78 Nm and then completely before tightening to final torque specification]: 20 -> 90deg + 90deg

I hope this helps.

[cambscruise]

the torgue settings are helpful but you've lost me when you started talking about bdtc etc.

[rsv gone!]

Before Top Dead Centre

[LaurenceFrost]

cambscruise said:

the torgue settings are helpful but you've lost me when you started talking about bdtc etc.

If you don't know what BTDC and ATDC are, I really don't think you should be timing up cams

BTDC is BEFORE Top Dead Centre
ATDC is AFTER Top Dead Centre

I hope this helps.