How do you remove Chicken Strips
How do you remove Chicken Strips
Author
Discussion

rev-erend

Original Poster:

21,624 posts

315 months

Tuesday 9th September 2008
quotequote all
Well - I've been riding quite happily for many years .. and all of a sudden I feel bad because I have chicken strips.

So - how do I get rid of em.

Track day

Track day with tuition

California Superbike school

or just go find a roundabout and get me knee down.

Bike is a ZX7R.

C8PPO

20,881 posts

234 months

Tuesday 9th September 2008
quotequote all
rev-erend said:
How do you remove Chicken Strips
rev-erend said:
Bike is a ZX7R.
Quite easily, I'd imagine!!

Roundabout is only going to do one side unless you're going out at 4am hehe

There's always the belt sander option....


(Psst - wanna buy some used sliders? biggrin )

rev-erend

Original Poster:

21,624 posts

315 months

Tuesday 9th September 2008
quotequote all
C8PPO said:
rev-erend said:
How do you remove Chicken Strips
rev-erend said:
Bike is a ZX7R.
Quite easily, I'd imagine!!

Roundabout is only going to do one side unless you're going out at 4am hehe

I'm not that nutty smile

There's always the belt sander option....

No way .. I'm not really that vain.

(Psst - wanna buy some used sliders?
hehe No..
biggrin )

black-k1

12,813 posts

260 months

Tuesday 9th September 2008
quotequote all
For getting rid of the chicken strips, you have two options.

Easy option – electric sander and paddock stand!

Hard option – Ride fast enough to remove them!

If you go out with the sole purpose of removing your chicken strips (road or track) then there is a good chance that it will all end in tears. You will inevitably push beyond your limit at which point it is only a matter of time before something goes pear shapped.

I would suggest you need to work on making your cornering smoother. Ensure that you are using the correct speed/gear etc. on entry, that you are looking through the corner and that you are using the throttle to drive out. Make a point of ensuring that your lines are correct (remembering that road and track lines are very different) and that you are comfortable and relaxed.

Once all of this starts to fall into place, your cornering speed will increase without you even thinking about it as will your lean angles but, most importantly, you will still be riding safely. Bye bye chicken strips!

Ride safe and enjoy.

carinatauk

1,617 posts

283 months

Tuesday 9th September 2008
quotequote all
black-k1 said:
For getting rid of the chicken strips, you have two options.

Easy option – electric sander and paddock stand!

Hard option – Ride fast enough to remove them!

If you go out with the sole purpose of removing your chicken strips (road or track) then there is a good chance that it will all end in tears. You will inevitably push beyond your limit at which point it is only a matter of time before something goes pear shapped.

I would suggest you need to work on making your cornering smoother. Ensure that you are using the correct speed/gear etc. on entry, that you are looking through the corner and that you are using the throttle to drive out. Make a point of ensuring that your lines are correct (remembering that road and track lines are very different) and that you are comfortable and relaxed.

Once all of this starts to fall into place, your cornering speed will increase without you even thinking about it as will your lean angles but, most importantly, you will still be riding safely. Bye bye chicken strips!

Ride safe and enjoy.
yes totally agree, very sound advice. You will lose them in time but as the man said it will happen but pushing it will end in tears.

I also find that I have a preference on one side than the other. Weird, but the side changed whilst in Europe. Obviously, far to much caution!


AndyDRZ

1,202 posts

267 months

Tuesday 9th September 2008
quotequote all
I had a 7r and I could get to the edge on the right hand side and about 5mm from the left hand side.

However, on the same bike I could do the same roads quicker and have an inch wide chicken strip either side - it's all to do with how you take the corners. Do you "racing line" it (within your own lane) or do you follow the curve? Racing line is quicker but you keep the chicken strips.


RemaL

25,103 posts

265 months

Tuesday 9th September 2008
quotequote all
never got my knee down yet. in no rush. wil happen 1 day.

as for losing your strips just have faith in the corners. trust yourself and the bike. I know my bike is must more capable than I am at going around a corner.

as I said on another thread, only done 80 miles last night on new tyres. no strips left. mainly managed it as I went to some lovely roads near Abergavenny and know them very well



Edited by RemaL on Tuesday 9th September 15:35

RemaL

25,103 posts

265 months

Tuesday 9th September 2008
quotequote all
black-k1 said:
For getting rid of the chicken strips, you have two options.

Easy option – electric sander and paddock stand!

Hard option – Ride fast enough to remove them!
or 3 - try rubbing them down on a tree/hedge like Chilli





i'm kidding nic




Edited by RemaL on Tuesday 9th September 15:37

rev-erend

Original Poster:

21,624 posts

315 months

Tuesday 9th September 2008
quotequote all
I'm not getting the lean angle vs speed part..

Why would I need to lean more at higher speed..

Perhaps I should just go out and ride it instead of typing biggrin Sham it's raining frown

surfsofa

406 posts

314 months

Tuesday 9th September 2008
quotequote all
In my limited experience, lesson number 1 in biking is to do your own thing. Sure, I'll be happy when my chicken strips are gone, but I'm not going to rush something that'll happen by itself when I'm ready. BOKIRK! smile

lawrence567

7,507 posts

221 months

Tuesday 9th September 2008
quotequote all
RemaL said:
black-k1 said:
For getting rid of the chicken strips, you have two options.

Easy option – electric sander and paddock stand!

Hard option – Ride fast enough to remove them!
or 3 - try rubbing them down on a tree/hedge like Chilli





i'm kidding nic




Edited by RemaL on Tuesday 9th September 15:37
The reason chilli gets to practice so much is because he works in a bank, we all know people who work in banks just pen push all day...

robstvr

3,217 posts

299 months

Tuesday 9th September 2008
quotequote all
Lend your bike to a mate who's mental.

black-k1

12,813 posts

260 months

Tuesday 9th September 2008
quotequote all
rev-erend said:
I'm not getting the lean angle vs speed part..

Why would I need to lean more at higher speed..

Perhaps I should just go out and ride it instead of typing biggrin Sham it's raining frown
For any given bend, the faster the bike is going, the further over it will have to lean in order to get around.

As you go around a bend, (a right hander for example) the force will effectively try to push you over to the left. (Hence cars ‘roll’ to the left on right hand bends). On a bike you counter that force by leaning into the bend. As the speed of the bike increases so the amount of force applied has to increase in order to make the corner. This increased force requires an increased angle of lean to counter-act it and thus stop the bike ‘falling over’.

jon-

16,534 posts

247 months

Tuesday 9th September 2008
quotequote all
Knee down no problem last night, worn through my right toe slider on my boots (and part of the boot) yet i still have a few mm chicken strip on my rear tyre.

Quite frustrating. I've been low enough to feel like the bike was dropping before i stood it up too.

jjr1

3,042 posts

291 months

Tuesday 9th September 2008
quotequote all
jon- said:
Knee down no problem last night, worn through my right toe slider on my boots (and part of the boot) yet i still have a few mm chicken strip on my rear tyre.

Quite frustrating. I've been low enough to feel like the bike was dropping before i stood it up too.
You must be hanging off like a baboon to get your knee down and still have chicken strips?

I can get rid of chicken strips just by leaning a bike over and never get my knee down unless it is for the obligatory trackday photos

jon-

16,534 posts

247 months

Tuesday 9th September 2008
quotequote all
jjr1 said:
jon- said:
Knee down no problem last night, worn through my right toe slider on my boots (and part of the boot) yet i still have a few mm chicken strip on my rear tyre.

Quite frustrating. I've been low enough to feel like the bike was dropping before i stood it up too.
You must be hanging off like a baboon to get your knee down and still have chicken strips?

I can get rid of chicken strips just by leaning a bike over and never get my knee down unless it is for the obligatory trackday photos
Not overly, but I am quite tall (6'4 almost). Must try harder...

robstvr

3,217 posts

299 months

Tuesday 9th September 2008
quotequote all
Hey, Jon-, you weren't at Brands last night were you?

jon-

16,534 posts

247 months

Tuesday 9th September 2008
quotequote all
Nope Rob, was hooning around north herts with a few other bikers. Great night for a ride, just the right temperature.

Hope you had a fun at brands.

castrolcraig

18,073 posts

237 months

Tuesday 9th September 2008
quotequote all
op asked, how do you remove chicken strips...

answer..




jon-

16,534 posts

247 months

Tuesday 9th September 2008
quotequote all
I think the only time I'll ever get my elbow down like that my shoulder then head will be closely following.