Removing heated grips - superglue
Removing heated grips - superglue
Author
Discussion

dern

Original Poster:

14,055 posts

310 months

Monday 29th September 2008
quotequote all
I fitted some oxford heated grips on my blade last year and would quite like to transfer them to the trophy. The left one has worked its way lose anyway so that's not an issue but the right one is still on firm. Is there anything I can do to unglue them given that they were stuck on with superglue or is the only way they're coming off in bits?

Cheers,

Mark

evo stu

224 posts

222 months

Monday 29th September 2008
quotequote all
id guess they would be very hard to get off in 1 peice if super glued frown

Stig

11,823 posts

315 months

Monday 29th September 2008
quotequote all
If you can get an edge lifted, stick a compressor airgun in there and give it a blast (assuming you have access to one!)

dern

Original Poster:

14,055 posts

310 months

Monday 29th September 2008
quotequote all
Stig said:
If you can get an edge lifted, stick a compressor airgun in there and give it a blast (assuming you have access to one!)
Yeah, I do... I'll try that.

I should have googled first - apparently acetone is good as it softens the glue as does (alarmingly) warm water.

I'll piss about with it for a couple of hours and then go buy a new set once i've knackered them wink

Cheers,

Mark

agent006

12,058 posts

295 months

Monday 29th September 2008
quotequote all
Try This

Edited by agent006 on Monday 29th September 12:57


edit: well you could if Halalfords website wasn't so st. It's Loctite Suerglue remover. £3.something

Edited by agent006 on Monday 29th September 12:57

Fats25

6,260 posts

260 months

Monday 29th September 2008
quotequote all
dern said:
............ it softens the glue as does (alarmingly) warm water.

I'll piss about with it .........
Cut out all the effort and just piss on it - should do the same trick!

Edited by Fats25 on Monday 29th September 13:22

dern

Original Poster:

14,055 posts

310 months

Monday 29th September 2008
quotequote all
Fats25 said:
dern said:
............ it softens the glue as does (alarmingly) warm water.

I'll piss about with it .........
Cut out all the effort and just piss on it - should do the same trick!
I've got enough charging/electrical issues with it as it is without it smelling of piss when it all inevitably shorts out wink

black-k1

12,817 posts

260 months

Monday 29th September 2008
quotequote all
Just in case you’ve not thought of it (and I’m sure you have) are the bars the same diameter on both bikes so that the grips will move happily from one to the other?

dern

Original Poster:

14,055 posts

310 months

Monday 29th September 2008
quotequote all
black-k1 said:
Just in case you’ve not thought of it (and I’m sure you have) are the bars the same diameter on both bikes so that the grips will move happily from one to the other?
I hadn't redface

Good point, I'll check first smile

Mr Gear

9,416 posts

221 months

Monday 29th September 2008
quotequote all
Personally, I'd sell the bike with them on and buy a new set. Surely they add a bit of value to your old bike? I only paid £50 for my Oxford grips, and then £20 to fit, so it'd worth it to cut out the hassle, right?

dern

Original Poster:

14,055 posts

310 months

Monday 29th September 2008
quotequote all
Mr Gear said:
Personally, I'd sell the bike with them on and buy a new set. Surely they add a bit of value to your old bike? I only paid £50 for my Oxford grips, and then £20 to fit, so it'd worth it to cut out the hassle, right?
I'm not selling the bike that they're on... it's being promoted to weekend and track use.